OpenMarine

Hi,
i have the following Problems.
I used a openplotter on a Pi3. I have a second USB WiFi Adapter, a keybord, a mouse and a Logilink Serial Adapter with 8 Ports (AU0033) on USB.
The Software works fine with WIFI Bridge and the USB  mouse and keybord. If I plug in the Logilink all other devices on USB doesn´t work. But the devices are still listed in lsusb.
Over VNC I can use the the Logilink and it was find from openplotter.
If I used rasbian Jessie without openplotter all works fine.
Have anybody a Idea?
Sorry for my english.
Thomas

Hi glowntiger,
which version do you use?

openplotter v1.0.0 is rspbian stretch, have you tested this on clean rasbian stretch?

This smells like powering issue

Hi,
yes it was a clean openplotter v1.0.0. No further configurations.
On a clean stretch without openplotter on the same Pi (another card) all works fine...
I have also tested with a powerded hub on openplotter. Also with forced powered usb... (config.txt)