OpenMarine

Full Version: RPI 3 + Openplotter v1xx
You're currently viewing a stripped down version of our content. View the full version with proper formatting.
I don't understand , when I run openplotter v1xx on my RPI 3 brand new, the startup process stops (see photo).

Help me :-(

(2018-06-26, 05:52 PM)Arwen Wrote: [ -> ]I don't understand , when I run openplotter v1xx on my RPI 3 brand new, the startup process stops (see photo).

Help me :-(
as the picture does not pass, here is the text:
[     1.963442] ---[ end kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(17.9.2)
Your SD seems to be corrupted. Burn your SD again. If the error persist change your SD.
the message unknown-block is a clear synonym that the SD card is failing either because it is in poor condition, because it has been used too much or because it has not been removed in the safe way before its writing is finished. It's either a brand new or an old, recycled card?
Very good post. Lots of information mentioned in this article. Thanks for sharing here.
I solved my problem :-)
Using the latest version of win32diskimager, I was having trouble turning on the RPI. By using the copy function of the SD card on openplotter, all my SD cards will work :-)

I am looking for a v0.8.0 version of Openplotter which is no longer on the Sailoog site, would someone still have this available, because it is the version that works on the boat and my SD card is HS