OP keeps on asking to change SignalK password.
I launch SK webApp, and try do access, I couldn't, so I tried to create an account. (Sign Up)
Then I am requested an email (BTW why ?), I give one valid email, a password, I confirm the password, click Create an account, but it freezes and nothing happens...
I am only trying to set a password for SK, all this seems to be over sophisticated !
(2019-03-26, 11:02 AM)Didier B Wrote: [ -> ]OP keeps on asking to change SignalK password.
I launch SK webApp, and try do access, I couldn't, so I tried to create an account. (Sign Up)
Then I am requested an email (BTW why ?), I give one valid email, a password, I confirm the password, click Create an account, but it freezes and nothing happens...
I am only trying to set a password for SK, all this seems to be over sophisticated !
user name - openplotter, password - openplotter
(2019-03-26, 11:09 AM)PaddyB Wrote: [ -> ]user name - openplotter, password - openplotter
result : {"statusCode".401,"message"."Invalid Password"}
(2019-03-26, 05:06 PM)Didier B Wrote: [ -> ] (2019-03-26, 11:09 AM)PaddyB Wrote: [ -> ]user name - openplotter, password - openplotter
result : {"statusCode".401,"message"."Invalid Password"}
Is that from 10.10.10.1:3000?
Sent from my SM-T813 using Tapatalk
(2019-03-26, 05:08 PM)PaddyB Wrote: [ -> ] (2019-03-26, 05:06 PM)Didier B Wrote: [ -> ] (2019-03-26, 11:09 AM)PaddyB Wrote: [ -> ]user name - openplotter, password - openplotter
result : {"statusCode".401,"message"."Invalid Password"}
Is that from 10.10.10.1:3000?
Sent from my SM-T813 using Tapatalk
Ooops, probably a typing mistake, it is working now !
I'm preparing to transfer a config to someone else, so I am struggling to clean accounts ans Passwords
- recorded password in Chromium : cleaned ! (may be my mistake)
- Signal k node server : no access possible, openplotter/openplotter doesn't work neither openplotter/pre ! Is there a possibility to reset other than force an update to 1.2.0 ?
In fact, I would like to set a password distinct from "openplotter".
EDIT : I've forced update 1.2.0 => 1.2.0, hope it could save the signalK password issue
EDIT 2 : it didn't ! (Murphy's law probably ...). Which leaves me with 2 options:
- SHIFT F1, then rebuild the building brick after brick, or
- dd the128 Gb of the SSD, which will take say 12 hours, but will run unassisted ...
need a coffee break ...
...
...
EDIT 3 : Option 2, Its gone for the night ...
EDIT 4 : After 36402s its done ... Conclusion : A second admin account is required in signal K !
(2019-03-26, 05:08 PM)PaddyB Wrote: [ -> ] (2019-03-26, 05:06 PM)Didier B Wrote: [ -> ] (2019-03-26, 11:09 AM)PaddyB Wrote: [ -> ]user name - openplotter, password - openplotter
result : {"statusCode".401,"message"."Invalid Password"}
Is that from 10.10.10.1:3000?
Sent from my SM-T813 using Tapatalk
I have the same problems,
I have tried using 10.10.10.1:3000 in the address line but the same invalid password came back.
I have tried doing this via VNC and with a monitor and keyboard hooked up. All attempts failed.
(2021-09-16, 09:26 AM)Marcus2021 Wrote: [ -> ] (2019-03-26, 05:08 PM)PaddyB Wrote: [ -> ] (2019-03-26, 05:06 PM)Didier B Wrote: [ -> ] (2019-03-26, 11:09 AM)PaddyB Wrote: [ -> ]user name - openplotter, password - openplotter
result : {"statusCode".401,"message"."Invalid Password"}
Is that from 10.10.10.1:3000?
Sent from my SM-T813 using Tapatalk
I have the same problems,
I have tried using 10.10.10.1:3000 in the address line but the same invalid password came back.
I have tried doing this via VNC and with a monitor and keyboard hooked up. All attempts failed.
just in case someone else is looking for a solution:
https://openplotter.readthedocs.io/en/la...k_app.html
- Open a terminal
- Delete the existing file: /home/pi/.signalk/defaults.json
- Run the setup sudo signalk-server-setup. Accept the update option rather than configuring from scratch. Select no for port 80 and SSL
- Navigate to the login page with a browser. Note that the option is now not to login but instead to create an administrator account. Once you do that you will be offered the login page.