OpenMarine

Full Version: Can I use the IMU sensor GY-511 with LSM303DLHC with Openplotter?
You're currently viewing a stripped down version of our content. View the full version with proper formatting.
HI
I have the IMU sensor GY-511 with LSM303DLHC, I tried to connect it, and is seen by i2cdetect but is not recognized at all by Openplotter, can I configure the software to use this?
No. You need minimum a 9 dof. Have a look into the readme of the library
https://github.com/sailoog/RTIMULib2/blo.../README.md.
If you add a L3GD20H it should work.