2017-08-29, 05:47 PM
Hi everybody
This summer I had OP 0.13 on the boat and tried to feed 1W temperature to MTW-sentence via the NMEA0183- Generator. This worked OK whilst doing the configuration, the MTW sentence showed up in the logs with correct values, but after a reboot it showed -273.1 as a value, which is just the conversion value from °K to °C. Tried to reconfigure several times, but never got correct values after a reboot.
So it seems that the NMA-Generator doesn't get anymore the value from 1W-Sensor after a fresh boot ???
After coming home, I updated to OP 0.14.5, same behaviour. I have to restart configuration all over (1W, SK restart, NMEA configurator, SK restart) to have correct values.
Might be the same issue as http://forum.openmarine.net/showthread.php?tid=706
But as it is present in 0.13 and 0.14.5 it rather seems to me being a problem with data getting from 1W to SK to NMEA Generator.
Thanks for any help
Christian
This summer I had OP 0.13 on the boat and tried to feed 1W temperature to MTW-sentence via the NMEA0183- Generator. This worked OK whilst doing the configuration, the MTW sentence showed up in the logs with correct values, but after a reboot it showed -273.1 as a value, which is just the conversion value from °K to °C. Tried to reconfigure several times, but never got correct values after a reboot.
So it seems that the NMA-Generator doesn't get anymore the value from 1W-Sensor after a fresh boot ???
After coming home, I updated to OP 0.14.5, same behaviour. I have to restart configuration all over (1W, SK restart, NMEA configurator, SK restart) to have correct values.
Might be the same issue as http://forum.openmarine.net/showthread.php?tid=706
But as it is present in 0.13 and 0.14.5 it rather seems to me being a problem with data getting from 1W to SK to NMEA Generator.
Thanks for any help
Christian