Navman wind 3100s no nmea to OP - Printable Version +- OpenMarine (https://forum.openmarine.net) +-- Forum: OpenPlotter (https://forum.openmarine.net/forumdisplay.php?fid=1) +--- Forum: How do I...? (https://forum.openmarine.net/forumdisplay.php?fid=3) +--- Thread: Navman wind 3100s no nmea to OP (/showthread.php?tid=1045) |
Navman wind 3100s no nmea to OP - cepicscepics - 2018-03-03 Hi, I just installed an used wind instrument on boat, I would like to send the nmea0183 sentence (IIMWV and IIVPW) to Openplotter is it possible? Nmea out from wind instrument to A+ and ground to B+ of the serial/USB adaptor In the nmea tab I selected the USB1, 4800 baud, apply change, restart but no sentences on inspector. I also tried to applying filters to IN sentences but no joy Op 8.0 Ideas? CheersĀ RE: Navman wind 3100s no nmea to OP - cepicscepics - 2018-03-13 nobody knows?? RE: Navman wind 3100s no nmea to OP - jim321 - 2018-03-13 Op 0.8.0 ? little to no support for that ver. newer http://www.sailoog.com/blog/download-openplotter-rpi-v0100-noobs then update takes hours be patient 0.17.1 is the stable ver. now https://github.com/sailoog/openplotter/blob/beta/CHANGELOG.md RE: Navman wind 3100s no nmea to OP - cepicscepics - 2018-03-14 thanks a lot I will try Navman wind 3100s no nmea to OP - callmecalanca - 2018-04-03 I updated to last stable.. but no joy.... Is it correct the connection I made? How can I test nmea output of wind instrument? Inviato dal mio iPad utilizzando Tapatalk RE: Navman wind 3100s no nmea to OP - jim321 - 2018-04-03 http://forum.openmarine.net/showthread.php?tid=1003&pid=4847#pid4847 usb serial adapter ? Navman wind 3100s no nmea to OP - callmecalanca - 2018-04-03 Tnks a lot, I Will try soon with this: https://www.amazon.fr/Generic-RS232-Serial-Cable-Adapter/dp/B014MRVYUQ/ref=pd_rhf_schuc_p_img_6?_encoding=UTF8&psc=1&refRID=R24R8MEKVM8YMWSGRGK5 And this: https://www.amazon.fr/femelle-adaptateur-Plaque-Position-Terminal/dp/B01EZQ9UHI/ref=pd_rhf_dp_s_cp_0_3?_encoding=UTF8&pd_rd_i=B01EZQ9UHI&pd_rd_r=6VHH83F5880E5BDHSASP&pd_rd_w=imNRo&pd_rd_wg=a7sic&psc=1&refRID=6VHH83F5880E5BDHSASP I will post here the result......... Inviato dal mio iPad utilizzando Tapatalk Navman wind 3100s no nmea to OP - callmecalanca - 2018-04-08 I tested the rs232/USB adapter with the wind and it worked connecting the white cable to pin 2 of the serial and gnd to pin 5. I tested also with the autopilot raymarine st 1000+ but no joy... during and after this second test the serial adapter is not more visible in the port menu/add window/nmea tab.... NEVER A JOY!!!!!! Op 11.11 Rpi3 Gps bt amtec Imu MPU 9250 Pressure BMP180 Temperature HTU21D Humidity HTU21D dAISy Navman wind 3100s no nmea to OP - callmecalanca - 2018-05-17 (2018-04-08, 03:43 PM)callmecalanca Wrote: I tested the rs232/USB adapter with the wind and it worked connecting the white cable to pin 2 of the serial and gnd to pin 5. Op 0.17 Rpi3 Gps USB Imu MPU 9250 Pressure BMP180 Temperature HTU21D Humidity HTU21D Ais tv dongle Adafruit thermal printer Navman Wind 3100 Navman echo Raymarmarine st1000+ Ina3221 RE: Navman wind 3100s no nmea to OP - Saqqara - 2018-05-17 Remember the TX from the Wind goes to the RX of the autopilot, not TX to TX. Drop into terminal. try these commands: lsusb make sure your usb adapter or adapters are showing. dmesg | grep tty should be able to find the ports linux has given your serial ports. |