+- OpenMarine (https://forum.openmarine.net)
+-- Forum: OpenPlotter (https://forum.openmarine.net/forumdisplay.php?fid=1)
+--- Forum: General discussion (https://forum.openmarine.net/forumdisplay.php?fid=2)
+--- Thread: BMP180 Pressure Sensor (/showthread.php?tid=1076)
BMP180 Pressure Sensor - chris3333 - 2018-03-18
I can add the Sensor but I am not able to generate the NMEA 0183 String.
I am not able to set a Group.
Can anybody help me?
I am using the actual Version 0.17.1
Thank you in advance.
RE: BMP180 Pressure Sensor - Sailoog - 2018-03-19
You have to set the sensor on I2C tab to generate signal k data before converting to NMEA 0183
RE: BMP180 Pressure Sensor - chris3333 - 2018-03-20
(2018-03-19, 06:58 PM)Sailoog Wrote: You have to set the sensor on I2C tab to generate signal k data before converting to NMEA 0183
Thank you for reply. I did that already, but i got only 0 Values in the NEMA Stream. AIS is working fine. The Sensor was running well with your Version 0.12.0 . Is it possible that the pi has power issues?
Thank you,
Christian
RE: BMP180 Pressure Sensor - chris3333 - 2018-03-21
(2018-03-20, 09:55 AM)chris3333 Wrote:(2018-03-19, 06:58 PM)Sailoog Wrote: You have to set the sensor on I2C tab to generate signal k data before converting to NMEA 0183
Thank you for reply. I did that already, but i got only 0 Values in the NEMA Stream. AIS is working fine. The Sensor was running well with your Version 0.12.0 . Is it possible that the pi has power issues?
Thank you,
Christian
here some screenshots: