heading magnetic ocpn - Printable Version +- OpenMarine (https://forum.openmarine.net) +-- Forum: OpenPlotter (https://forum.openmarine.net/forumdisplay.php?fid=1) +--- Forum: General discussion (https://forum.openmarine.net/forumdisplay.php?fid=2) +--- Thread: heading magnetic ocpn (/showthread.php?tid=1192) |
heading magnetic ocpn - jim321 - 2018-05-31 i was setting up dashboard ocpn. the true compass only gets data when basic autopilot is picked in pypilot tab. and doesn't work with IMU only. just an observation. RE: heading magnetic ocpn - Sailoog - 2018-06-01 Yes, if you set "IMU only" You generates signal k data and you have to translate to NMEA0183 with the SK plugin. but if you set "basic autopilot" pypilot generates NMEA 0183 and you have to do nothing. I am not happy with this neither. I will change this on next update to be automatic and obfuscated to user. RE: heading magnetic ocpn - jim321 - 2018-06-01 thanks also noticed in tools ocpn defaults nmea generator that there is roll and pitch but not heading. is this connected to the signal k generator now ? RE: heading magnetic ocpn - longjohn119 - 2018-06-02 (2018-06-01, 12:42 PM)jim321 Wrote: thanks Same here, no way to generate the HDG or HDM sentence ..... Plus I get nothing when I run SK Diagnostic and when I try to close the window it hangs and I get an error message and I have to force an 'End process'. If I go into the SignalK web interface I don't have the app store or server just Webapps. Because of this I'm not getting any output (GPS, AIS, and Heading) to my plotter/finder Luckily I did it on a new SD card so all I have to do is pop the old one in and I'm back in business with the old version. I need to get this mounted in my boat this weekend so I'm not going to do anything when the new version. It is already doing everything I needed it to do and the only real perk to upgrading that I saw so my application was being able to set the WiFi up as both an AP and a client RE: heading magnetic ocpn - jim321 - 2018-06-03 "If I go into the SignalK web interface I don't have the app store or server just Webapps. " i think you need to sign in first, top right RE: heading magnetic ocpn - jim321 - 2018-06-03 i get all the info for heading magnetic roll pitch in sk diagnostics have you calibrated the imu.? "Plus I get nothing when I run SK Diagnostic and when I try to close the window it hangs and I get an error message and I have to force an 'End process'." i use to get that too on v.0.17 i think it was a power problem havent had it with a new power supply or on this release. v1.0 |