+- OpenMarine (https://forum.openmarine.net)
+-- Forum: OpenPlotter (https://forum.openmarine.net/forumdisplay.php?fid=1)
+--- Forum: General discussion (https://forum.openmarine.net/forumdisplay.php?fid=2)
+--- Thread: GPIO Pins (/showthread.php?tid=1203)
GPIO Pins - Lazzz - 2018-06-04
I have just installed the new version, thanks for a big effort Sailoog & friends, but I cannot connect to my GPIO pins.
The pins I am using don't show in the drop down list.
I read somewhere that the Actions aren't working yet is it the same for the GPIO pins or is it me??
RE: GPIO Pins - Sailoog - 2018-06-04
The list of available GPIO pins in GPIO tab has changed because we removed pins used by moitessier HAT to avoid conflicts. If you can not change to other pins edit this line: https://github.com/sailoog/openplotter/blob/ed7f8b97829ed0c8162ff25d4af79b85cd4e0d66/openplotter#L2046
On /home/pi/.config/openplotter/openplotter file. But only if you will not use the moitessier hat.
RE: GPIO Pins - Lazzz - 2018-06-04
(2018-06-04, 08:38 PM)Sailoog Wrote: The list of available GPIO pins in GPIO tab has changed because we removed pins used by moitessier HAT to avoid conflicts. If you can not change to other pins edit this line: https://github.com/sailoog/openplotter/blob/ed7f8b97829ed0c8162ff25d4af79b85cd4e0d66/openplotter#L2046
On /home/pi/.config/openplotter/openplotter file. But only if you will not use the moitessier hat.
Of course!! No problem I will move to other available pins.
THanks for that
