+- OpenMarine (https://forum.openmarine.net)
+-- Forum: OpenPlotter (https://forum.openmarine.net/forumdisplay.php?fid=1)
+--- Forum: How do I...? (https://forum.openmarine.net/forumdisplay.php?fid=3)
+--- Thread: AIS data (/showthread.php?tid=1328)
AIS data - barney2074 - 2018-07-22
Hello
I have an Openplotter system with an Actisense NGT-1
I can see AIS data that is obviously coming from the NGT-1 in the SignalK web apps (such as 'Maptracker'), but not in OpenCPN either on the Openplotter RPI system, or a remote system that is getting NMEA0183 data from Openplotter.
Is this something I need to configure in Openplotter for this to happen ?
I have also tried configuring OpenCPN to get NMEA0183 data directly from Signalk (using port 10110) but this does not seem to make any difference and the 'Convert SignalK to NMEA0183' plugin does not seem to deal with AIS
thank you
Andrew
RE: AIS data - Sailoog - 2018-07-24
Try installing the "signalk-n2kais-to-nmea0183" signal k plugin.
After installing enable it in plugin config
RE: AIS data - barney2074 - 2018-07-26
thank you
Andrew