+- OpenMarine (https://forum.openmarine.net)
+-- Forum: OpenPlotter (https://forum.openmarine.net/forumdisplay.php?fid=1)
+--- Forum: General discussion (https://forum.openmarine.net/forumdisplay.php?fid=2)
+--- Thread: BUG ? : Set time from NMEA and NKE instruments failure (/showthread.php?tid=1352)
BUG ? : Set time from NMEA and NKE instruments failure - bmayer - 2018-07-28
On board, instruments are old (but good) NKE instruments.
GPS are connected to an input instrument (gyrographic).
OpenPlotter are connected are connected to an other specialised instrument, an output interface to NMEA.
Open run well BUT cannot interpreted NMEA sentence for take date and time.
Probably because an obsolete / deprecated sentence (ZDA) are used ?
NKE typical NMEA sentences :
$IIDPT,0004.0,,*76
$IIDBT,0013.1,f,0004.0,M,,*7E
$IIVLW,0166.0,N,067.30,N*4E
$IIVHW,,,329.,M,00.00,N,00.00,K*17
$IIMWV,265,R,08.4,N,A*1E
$IIVWR,095.,L,08.4,N,04.3,M,015.6,K*62
$IIMTW,23.3,C*11
$IIVWT,094.,L,08.3,N,04.3,M,015.4,K*60
$IIHDG,329.,,,,*71
$IIHDM,329.,M*1A
$IIGLL,4730.163,N,00223.152,W,141124,A,A*40
$IIZDA,141124,01,06,2018,,*50
$IIVTG,134.,T,,M,00.0,N,00.0,K,A*2C