OpenCPN “send to GPS” via OpenPlotter - Printable Version +- OpenMarine (https://forum.openmarine.net) +-- Forum: OpenPlotter (https://forum.openmarine.net/forumdisplay.php?fid=1) +--- Forum: How do I...? (https://forum.openmarine.net/forumdisplay.php?fid=3) +--- Thread: OpenCPN “send to GPS” via OpenPlotter (/showthread.php?tid=1395) |
OpenCPN “send to GPS” via OpenPlotter - Zeilbootje - 2018-08-14 OpenCPN is connected through localhost to OpenPlotter and OpenPlotter has a serial connection to my mux. In OpenCPN when I want to send my route and way points I only can select a comport. Any ideas how I can send the track/way points trough the localhost to the serial connection via my Mux to the Raymarine C80 plotter? Do I need to make a virtual com port in OpenPlotter that is connected via the network? Any suggestios on how to tackle this problem? |