NMEA data export in OpenCPN 1.1.0 alpha - Printable Version +- OpenMarine (https://forum.openmarine.net) +-- Forum: OpenPlotter (https://forum.openmarine.net/forumdisplay.php?fid=1) +--- Forum: How do I...? (https://forum.openmarine.net/forumdisplay.php?fid=3) +--- Thread: NMEA data export in OpenCPN 1.1.0 alpha (/showthread.php?tid=1424) |
NMEA data export in OpenCPN 1.1.0 alpha - Ewald Harmsen - 2018-08-24 Hi all, I just moved from the old openplotter to the latest version on my RPI3. In OpenCPN I used to have 1 data import connection and one export connection by default. In the new OpenCPN, I only have a import. As I want to export my route data to my GPS repeater and autopilot as NMEA, I want to have an export as well. Which address should I use for that? RE: NMEA data export in OpenCPN 1.1.0 alpha - Sailoog - 2018-08-24 Connect your serial device. In serial tab give it a name /dev/ttyOP_xxx and assign to "none". In opencpn create a serial output and write /dev/ttyOP_xxx in DataPort. Select bauds and "output on this port" RE: NMEA data export in OpenCPN 1.1.0 alpha - Ewald Harmsen - 2018-08-24 Excellent thanks! Can you just copy this answer to the manual? |