+- OpenMarine (https://forum.openmarine.net)
+-- Forum: OpenPlotter (https://forum.openmarine.net/forumdisplay.php?fid=1)
+--- Forum: How do I...? (https://forum.openmarine.net/forumdisplay.php?fid=3)
+--- Thread: connect a bluetooth speaker (/showthread.php?tid=1481)
Pages:
1
2
connect a bluetooth speaker - Didier B - 2018-09-15
Any chance to use a bluetooth speaker ?
I can pair one, but not "connect" it.
When I click connect in the BT menu, I get a message : "connection failled. Use the audio menu to connect to this device".
In the Preference/audio menu I don'tsee anything allowoing to do so ...
Also, when right clicking the audio applet in the task bar, it only shows HDMI or analog
assistance most welcomed !
RE: connect a bluetooth speaker - e-sailing - 2018-09-16
click upper right corner on the bluetooth symbol
select "Add Device"
select your bluetooth speaker
click Pair (a message should come "Paired successfully. Use the audio menu to select as output device.")
right click upper right corner on the audio symbol (a menu comes up with "Analog, HDMI, (the name of your bluetooth speaker))
click on the name of your bluetooth speaker (connection to bluetooth audio device ...)
done
Disadvantage bluetooth speaker shut off after a few minutes (power saving) if they don't get any sound to play.
I can't tell you if it does work with a bluetooth car radio.
RE: connect a bluetooth speaker - Didier B - 2018-09-16
Hi e sailing,
the problem is that when I click connect in the BT menu, I get a message : "connection failed. Use the audio menu to connect to this device".
there I'm lost !
RE: connect a bluetooth speaker - jim321 - 2018-09-16
right click the speaker icon choose bt speaker
or try
sudo bluetoothctl
agent on
default-agent
scan on
pair xx:xx:xx:xx:xx (device mac)
trust xx:xx:xx:xx:xx
connect xx:xx:xx:xx:xx
probably need to right click speaker icon and choose it after all that too
RE: connect a bluetooth speaker - Didier B - 2018-09-16
Right cliick on the speaker icon opens a menu with only 2 choices : analog, or HDMI ....
I contacted BOSE support to get the Mac address ...
RE: connect a bluetooth speaker - jim321 - 2018-09-16
sudo bluetoothctl -h
i don't remember off hand you can try the help -h i think the command is "list or devices" but that will show devices with the mac address.
http://www.linux-magazine.com/Issues/2017/197/Command-Line-bluetoothctl
RE: connect a bluetooth speaker - Didier B - 2018-09-19
MERCI, GRACIAS, THANK YOU !
Thanks e-sailing and Jim 321, my nav and mooring nights will now be surrounded by good music, a great progress on the former car radio solution !
Thank you also for the notice about bluetoothctl which increased my BT background of a factor higher than a 1000 !
Bluetooth speaker - Didier B - 2018-09-24
Ooops, I have been too enthusiast !
I can now pair and connect my bluetooth speaker, and select it with a right click on the speaker icon,
but though this worked for a short period of time, now it keeps resolutely silent !
(works like a charm with my tablet !) . Any idea ?
RE: connect a bluetooth speaker - e-sailing - 2018-09-24
Power save mode?
RE: connect a bluetooth speaker - Didier B - 2018-09-25
(2018-09-24, 09:51 PM)e-sailing Wrote: Power save mode?
Don't think so, everything else is responsive. It rather looks like a configuration problem, or a question of "right".
everything was fine for a couple of days, then ....