+- OpenMarine (https://forum.openmarine.net)
+-- Forum: OpenPlotter (https://forum.openmarine.net/forumdisplay.php?fid=1)
+--- Forum: Bug Reports (https://forum.openmarine.net/forumdisplay.php?fid=4)
+--- Thread: OPENCPN does not work at all in OPEN PLOTTER v1.0.0 (/showthread.php?tid=1497)
OPENCPN does not work at all in OPEN PLOTTER v1.0.0 - reptooyep - 2018-09-21
Hi everyone,
I have troubles making opencpn to work on my raspberrys.
I've tryed with the 1B without success.
Then, i've tryed with the raspberry 3b. No problem with ETCHER's img file.
I've also tryed to only install OPEN CPN on RASPBIAN with command lines, it works well but when i move the map with directionnal keys, the zoom plus shortcut does not work anymore since i reboot
I've bought a 2B cause i need my 3B for NESPI, the installation seems to complete without troubles but i can't load OPEN CPN ... Nothing happens.
I've tryed in the terminal : sudo opencpn and gets rhe error "segmentation fault"
Just after install, i've update and upgrade.
I would be greatfull if someone could help me with that.
RE: OPENCPN does not work at all in OPEN PLOTTER v1.0.0 - jim321 - 2018-09-22
ask yourself which is more important, navigation or playing games.
https://opencpn.org/wiki/dokuwiki/doku.php?id=opencpn:opencpn_user_manual:getting_started:opencpn_installation:raspberrypi_rpi2
https://kingtidesailing.blogspot.com/2015/09/how-to-install-opencpn-on-raspberry-pi.html
opencpn site
http://www.cruisersforum.com/forums/f134/
buy another pi3??
run it on a laptop?
RE: OPENCPN does not work at all in OPEN PLOTTER v1.0.0 - reptooyep - 2018-09-23
The 3B is definitely the best for that. I think the 2 B has a hardware failure cause the upgrade process
Has been very very long.
I'll try with another SD beforesending it back to the seller.