Using Moitessier HAT with pypilot ? - Printable Version +- OpenMarine (https://forum.openmarine.net) +-- Forum: OpenPlotter (https://forum.openmarine.net/forumdisplay.php?fid=1) +--- Forum: General discussion (https://forum.openmarine.net/forumdisplay.php?fid=2) +--- Thread: Using Moitessier HAT with pypilot ? (/showthread.php?tid=1592) |
Using Moitessier HAT with pypilot ? - Trex8u247 - 2018-11-28 Good Day I am wanting to get both the Moitessier HAT ( for all navigational Info ) and Pypilot ( For auto Pilot ). Would I need to buy two separate raspberry pi devices along with a USB GPS dongle for each? or is there a way I can get the two features on one raspberry pi or even get one raspberry pi to share its GPS location with another? Regards RE: Using Moitessier HAT with pypilot ? - jim321 - 2018-11-29 they are designed to work together on one pi. Moitessier HAT can work as standalone device RE: Using Moitessier HAT with pypilot ? - Sailoog - 2018-11-29 There are the UART pins to connect the pypilot controller. GPS and IMU are on the HAT. |