Update 0.17 to 1.2 - Printable Version +- OpenMarine (https://forum.openmarine.net) +-- Forum: OpenPlotter (https://forum.openmarine.net/forumdisplay.php?fid=1) +--- Forum: How do I...? (https://forum.openmarine.net/forumdisplay.php?fid=3) +--- Thread: Update 0.17 to 1.2 (/showthread.php?tid=1601) |
Update 0.17 to 1.2 - Didier B - 2018-12-05 My (backup) config is still built on OP 0.17. Is there a way to UPDATE to latest 1.2 Starting from a new downloaded 1.0 will probably kill my Oesenc chart set ... RE: Update 0.17 to 1.2 - Werner_K - 2018-12-05 (2018-12-05, 11:13 AM)Didier B Wrote: My (backup) config is still built on OP 0.17. Is there a way to UPDATE to latest 1.2 Openplotter 1.2 needs Raspberry Pi 3. If you have, Update should normally work. Not quite sure about this. On my PI 2 it did not work! So it probably is a complete change. You should make Backup of all your Charts before upgrading. Greetings Werner Gesendet von meinem LG-E986 mit Tapatalk RE: Update 0.17 to 1.2 - Didier B - 2018-12-05 (2018-12-05, 01:17 PM)Werner_K Wrote:Not sure neither RPI 3 is required.(2018-12-05, 11:13 AM)Didier B Wrote: My (backup) config is still built on OP 0.17. Is there a way to UPDATE to latest 1.2 The issue is not with the charts files but with the OeSenc DRM (aka "fingerprint ")... RE: Update 0.17 to 1.2 - Albatros - 2018-12-06 I am quite sure it is not a Fingerprint issue. In a new Setup create a new Fingerprint and post that wiithin your oesenc account |