Missing Tabs - Printable Version +- OpenMarine (https://forum.openmarine.net) +-- Forum: OpenPlotter (https://forum.openmarine.net/forumdisplay.php?fid=1) +--- Forum: General discussion (https://forum.openmarine.net/forumdisplay.php?fid=2) +--- Thread: Missing Tabs (/showthread.php?tid=1613) |
Missing Tabs - sven98de - 2018-12-20 Hi, I've installed openplotter 1.0.0 on a Raspberry 2 plus and it works so far, but when I compare the openplotter "TABs" in my installation with the sreenshots in the documentation, there are some differences. The following Tabs do not exsist: USB manager, NMEA0183, Compass I've used this documentation: https://sailoog.gitbooks.io/openplotter-documentation/content/en/op-tabs.html Any ideas ? Sven RE: Missing Tabs - abarrow - 2018-12-20 Have you tried going through the upgrade process to bring openplotter to the latest version? You might be challenged to use it on an RPI 2+! RE: Missing Tabs - sven98de - 2018-12-20 I've upgrade to Version 1.2.0 alpha now but there are no changes in the TABs display. Sven RE: Missing Tabs - jim321 - 2018-12-20 those tabs have changed USB manager is now serial ect. that documentation is old. incomplete but newest doc. https://docs.sailoog.com/openplotter-v1-x-x it should look like this now RE: Missing Tabs - sven98de - 2018-12-21 Thanks, that are the same Tabs which I have in my installation. Does this mean the compass and NMEA0183 are canceled in the new version ? Sven RE: Missing Tabs - jim321 - 2018-12-21 no its compass =pypilot NMEA0183 =kplex n2k =can usb manager =serial |