OpenMarine
Motor controler hook up - Printable Version

+- OpenMarine (https://forum.openmarine.net)
+-- Forum: Pypilot (https://forum.openmarine.net/forumdisplay.php?fid=17)
+--- Forum: General discussion (https://forum.openmarine.net/forumdisplay.php?fid=18)
+--- Thread: Motor controler hook up (/showthread.php?tid=1618)



Motor controler hook up - ddelorme - 2018-12-25

I need to know how the 4 serial wires are coded coming out of the motor control. I have White, Brown, Black, Blue..


Thanks


RE: Motor controler hook up - ddelorme - 2019-01-05

Hello I need to Know what the pinouts for the 4 wires are :ie tx rx grd 5+v

black  ==
white  ==
blue    ==
Brown ==


RE: Motor controler hook up - keithwhite - 2019-01-09

(2019-01-05, 08:11 PM)ddelorme Wrote: Hello I need to Know what the pinouts for the 4 wires are :ie tx rx grd 5+v

black  ==
white  ==
blue    ==
Brown ==

Brown - 3.3v (pin 1)
White - TX (pin 8)
Blue - RX (pin 10)
Black - GND (pin 6 or 9)

Rgds

Keith White


RE: Motor controler hook up - ddelorme - 2019-01-10

thanks


RE: Motor controler hook up - rastam4n - 2020-04-06

What are the 6 pins on the Moitessier hat? can they be used to connect the motor controller?


RE: Motor controler hook up - seandepagnier - 2020-04-08

Yes, 4 of them are used, the 3v3, gnd, tx and rx pins.