Adding environment.rpi.temperature in trigger list - Printable Version +- OpenMarine (https://forum.openmarine.net) +-- Forum: OpenPlotter (https://forum.openmarine.net/forumdisplay.php?fid=1) +--- Forum: How do I...? (https://forum.openmarine.net/forumdisplay.php?fid=3) +--- Thread: Adding environment.rpi.temperature in trigger list (/showthread.php?tid=1691) |
Adding environment.rpi.temperature in trigger list - topodom - 2019-03-04 Hi everyone, I had a problem this summer, my pi temperature processor got high. I want to add a fan to lower the temparature in the pi box. For that i will use a relay plugged on the GPIO and swich the GPIO on 1 when CPU temp is too high. I made some tests with a fake value (environment.inside.temperature) and it's working well with openplotter actions (define a gpio output, then a trigger then an action). Now i want to get rpi cpu temperature. For that i have installed a plugin on signal k serveur to monitor the cpu pi temperature who's addin a "environment.rpi.temperature" key. i can see the value and the key in signalK diagnostic in OP. But when i a am going to action > add trigger, i don't have the Signal K key (environment.rpi.temperature) in the list how can i set that ? cordially PS: i know there is an option with red node but i'd like to manage in OP: http://forum.openmarine.net/showthread.php?tid=1093 Cordialy |