AP gone after upgrade - Printable Version +- OpenMarine (https://forum.openmarine.net) +-- Forum: OpenPlotter (https://forum.openmarine.net/forumdisplay.php?fid=1) +--- Forum: Bug Reports (https://forum.openmarine.net/forumdisplay.php?fid=4) +--- Thread: AP gone after upgrade (/showthread.php?tid=1700) Pages:
1
2
|
AP gone after upgrade - PaddyB - 2019-03-10 Just did an apt-get update/upgrade and now the Pi 10.10.10.1 access point isn't there anymore. There was a warning about hostapd which I didn't pay much attention to, installing this by the looks of it > hostapd:armhf (2:2.4-1+deb9u2, 2:2.6-21~bpo9~rpt1) Anyone else seen this? Is there an easy fix? Ta Code: Start-Date: 2019-03-10 11:09:59 That was easy https://www.raspberrypi.org/forums/viewtopic.php?t=235145&p=1438991 $ sudo su # apt-cache madison hostapd hostapd | 2:2.6-21~bpo9~rpt1 | http://archive.raspberrypi.org/debian stretch/main armhf Packages hostapd | 2:2.4-1+deb9u2 | http://raspbian.raspberrypi.org/raspbian stretch/main armhf Packages # apt-get install hostapd=2:2.4-1+deb9u2 -V Back in action again. sudo systemctl enable hostapd.service seems to work as well without rolling back. RE: AP gone after upgrade - KolonelP - 2019-03-11 I have the same. Clicked to fast and the message was gone. I remember some lines about config files being moved to an other directory What you suggest is an rollback of the AP software. Isnt it better to move the config files? RE: AP gone after upgrade - abarrow - 2019-03-11 As was said in the thread that you posted on raspberrypi.org, what worked for me was uninstalling hostapd and re-installing it. RE: AP gone after upgrade - KolonelP - 2019-03-11 Confirmed, I used remove instead of purge to hold the config files. sudo apt-get remove hostapd sudo reboot sudo apt-get install hostapd To enable at startup: sudo update-rc.d hostapd enable sudo reboot RE: AP gone after upgrade - Sderbyshire - 2019-03-15 I’m having the upgrade failing on hostapd Tried the above but the reinstall fails with ‘exit code’ error Any suggestions? RE: AP gone after upgrade - PaddyB - 2019-03-15 (2019-03-15, 12:16 PM)Sderbyshire Wrote: I’m having the upgrade failing on hostapd Maybe try running this in a terminal first ( from link in the first post) then run the upgrade? sudo apt-mark hold hostapd RE: AP gone after upgrade - seandepagnier - 2019-03-18 Thanks for this! As my hdmi output is damaged I had to use a serial console to install the correct hostapd. RE: AP gone after upgrade - Sderbyshire - 2019-03-18 I successfully upgraded hostapd to the correct version, 2:2.4-1+deb9u2, and held it The upgrade then worked successfully For completeness i then installed usbmuxd and this allowed an iphone to be tethered for mobile internet access. Thanks for the help guys! RE: AP gone after upgrade - ddelorme - 2019-03-19 Thanks saved a lot of time, if only i had looked here first. RE: AP gone after upgrade - Geronius - 2019-05-04 Thanks @KolonelP that procedure fixed the problem (uap0 disassociated after raspbian upgrade) for me as well! |