OpenPlotter v2.x.x is coming!! - Printable Version +- OpenMarine (https://forum.openmarine.net) +-- Forum: OpenPlotter (https://forum.openmarine.net/forumdisplay.php?fid=1) +--- Forum: General discussion (https://forum.openmarine.net/forumdisplay.php?fid=2) +--- Thread: OpenPlotter v2.x.x is coming!! (/showthread.php?tid=1704) |
RE: OpenPlotter v2.x.x is coming!! - SkipperEarly - 2019-09-13 I know there is no support for op 2.09 but wonder if there is something I am missing. Although Moitessier hat seems to work fine I cant see any signalK values and also localhost:3000 does nothing. RE: OpenPlotter v2.x.x is coming!! - carlos-palma - 2019-09-14 Hi all, It may look silly, but how or where do you download the OP 2xx ?? My Pi 4 is on the way and my Pi 3b is ready to replace OP 1. Thanks and regards. RE: OpenPlotter v2.x.x is coming!! - MatsA - 2019-09-14 (2019-09-14, 01:17 AM)carlos-palma Wrote: Hi all, Hi ! Not yet in production but some hints here for the OP BETA 2. https://pysselilivet.blogspot.com/2019/08/openplotter-beta-v2-quick-install-guide.html RE: OpenPlotter v2.x.x is coming!! - carlos-palma - 2019-09-14 (2019-09-14, 12:57 PM)MatsA Wrote:(2019-09-14, 01:17 AM)carlos-palma Wrote: Hi all, Hi MatsA, thanks for the hint, now I can start plying!! RE: OpenPlotter v2.x.x is coming!! - Sailoog - 2019-09-14 I have published a openplotter 2 roadmap: http://forum.openmarine.net/showthread.php?tid=1992 RE: OpenPlotter v2.x.x is coming!! - carlos-palma - 2019-09-14 OK!!, I had not seen that, sorry. I will start looking into it. Thanks and regards, Carlos. RE: OpenPlotter v2.x.x is coming!! - leif_klasson@hotmail.com - 2019-09-17 (2019-09-13, 10:11 AM)SkipperEarly Wrote: I know there is no support for op 2.09 but wonder if there is something I am missing. Hi, a bit out of subject, but saw what i2C unit you were using. But that one is not waterproof? Using it on inside only? Otherwise, look for this LITTLE fellow: MS5837-02BA06 (i2C adress 76). Waterproof, Chlorine safe and also very accurate. I have tried some of them, really neat ones. And yes, a bit tricky, but possible to not use SMD technic, just solder some wires to them directly. /Leif RE: OpenPlotter v2.x.x is coming!! - CapnKernel - 2019-09-18 (2019-09-17, 09:22 AM)leif_klasson@hotmail.com Wrote: Otherwise, look for this LITTLE fellow: MS5837-02BA06 (i2C adress 76).Do you have a link for that part? RE: OpenPlotter v2.x.x is coming!! - sapers - 2019-09-19 Please help me! How to install NMEA0183 serial devices to OP v2 ? I can't to do it. Documentation for this version of OP has clear pages and I can't to find any information about it. Please help me. Thanks. RE: OpenPlotter v2.x.x is coming!! - verkerkbr - 2019-09-20 Hi Sapers, serial input can be done in SignalK. See my screenprint. Baudrate and/or post address can be different. Ans remember to restart SignalK after changes has been made. Bram |