no ais with gps in opencpn - Printable Version +- OpenMarine (https://forum.openmarine.net) +-- Forum: OpenPlotter (https://forum.openmarine.net/forumdisplay.php?fid=1) +--- Forum: Bug Reports (https://forum.openmarine.net/forumdisplay.php?fid=4) +--- Thread: no ais with gps in opencpn (/showthread.php?tid=187) |
no ais with gps in opencpn - cepicscepics - 2016-08-18 Hi, in opencpn, I can't always have my position and ais signal... Gps works quite always but it don't when AIS work and viceversa When ais work I have gps data in inspector but not in opencpn I Made test also with a gps usb antenna, it seems more stable but same problem My configuration is: Rpi3 Gps BT antenna emtac Daisy AIS reciver Openplotter 8.0 If I open openplotter in Debug mode, the terminal say 'DEVLINKS' I did this http://forum.openmarine.net/printthread.php?tid=79 to install the BT antenna To install daisy I add a serial in openplotter NMEA 0183 tab in /Dev/ttyACM0 at 38400 baud Thanks a lot RE: no ais with gps in opencpn - Sailoog - 2016-08-19 Please try creating "Alias" for GPS and AIS in "USB manager" tab, then use these alias for setting the serial inputs in NMEA 0183 tab. RE: no ais with gps in opencpn - cepicscepics - 2016-08-19 (2016-08-19, 11:17 AM)Sailoog Wrote: Please try creating "Alias" for GPS and AIS in "USB manager" tab, then use these alias for setting the serial inputs in NMEA 0183 tab. in "USB manager" tab I can only find "daisy" and not the gps BT antenna. Now it is working but sometimes it lost the gps signal Another screenshot More screenshot And more Last screenshot It is completely unstable... Now it is not working no ais with gps in opencpn - callmecalanca - 2017-06-20 Same procedure on OP 10? Inviato dal mio iPhone utilizzando Tapatalk |