OpenMarine
Different PGNs for speed in OP and Raymarine - Printable Version

+- OpenMarine (https://forum.openmarine.net)
+-- Forum: OpenPlotter (https://forum.openmarine.net/forumdisplay.php?fid=1)
+--- Forum: How do I...? (https://forum.openmarine.net/forumdisplay.php?fid=3)
+--- Thread: Different PGNs for speed in OP and Raymarine (/showthread.php?tid=1888)



Different PGNs for speed in OP and Raymarine - wanni - 2019-07-17

Hi,

i set up OP Plotter on my raspi with the can-bus adapter sold by the sailoog team. Everything works fine so far (even the AIS over N2K is working now)

One problem is still not solved: I use a raymarine i50 speed display in my cockpit. i can switch between speed and SOG. the SOG is always "---" or 0.

looking in the kplex data stream and outgoing PGNs there is an PGN for SOG which is send to the network, but (from my mind, im not at the boat this month) these are different PGNs. The ones send do not match the ones accepted from raymarine. is there a possibility to match the PGNs? Or what else am I doing wrong?

best regards

Thomas