SMS interface implemented - Printable Version +- OpenMarine (https://forum.openmarine.net) +-- Forum: OpenPlotter (https://forum.openmarine.net/forumdisplay.php?fid=1) +--- Forum: Feature Requests (https://forum.openmarine.net/forumdisplay.php?fid=5) +--- Thread: SMS interface implemented (/showthread.php?tid=19) |
SMS interface implemented - Sailoog - 2016-03-27 I have added an interface to send SMS from GSM dongles and phones connected by USB or Bluetooth. This is the list of compatible devices: http://wammu.eu/phones/ with some data to configure them. I have tested it with an Huawei K3520 GSM dongle and works like a charm. Now I have to add the "send SMS" action but you can already play sending test messages Follow these instructions to test: http://www.sailoog.com/en/blog/test-openplotter-v080beta I have not tested with phones yet. More info: http://wammu.eu/docs/manual/faq/index.html RE: SMS interface implemented - snowboarder - 2016-03-27 Is it possible to build in a option to send sms with HTTP POST/GET syntax ? i have a Teltonika RUT500 3g router that have that option. (Teltonika RUT500) HTTP POST/GET string example http://xxx.xxx.xxx.xxx/cgi-bin/sms_send?number=0037061212345&text=test RE: SMS interface implemented - Sailoog - 2016-03-28 Yes it is, but that should be a new action/trigger able to manage GET/POST Noted on features requests, thanks! SMS interface implemented - Alpenskipper - 2016-04-12 It would be nice to request a status report via SMS from outside the boat. Viele Grüße, Martin www.sirius-forum.de RE: SMS interface implemented - Sailoog - 2016-04-13 You will be able to get keywords from SMS and trigger an action to send any value by SMS RE: SMS interface implemented - Alpenskipper - 2016-04-23 Hi Sailoog, I now got a K3520, too. It is recognized by Raspian and I can send SMS from command line. In Openplotter I set up a serial device and used it in the SMS dialog. When testing, the device can not be connected. What am I doing wrong? Martin RE: SMS interface implemented - Renato - 2016-04-24 I have tested it with an Huawei E220 USB connected via USB and it is ok But when I try to send an SMS via trigger I have this problem: I set the trigger Time: time operator: was present in the last (sec) value= 180500 (for the tast I set the current time plus 10 minutes) I expect that after 10 minutes the SMS starts, but the SMS starts after a few seconds i think maybe I'm wrong by setting the trigger, which is the correct setting? RE: SMS interface implemented - Sailoog - 2016-04-24 Yes your settings is not what you want. Your setting means: The trigger will be true if in the last 10 minutes the magnitude Time has had a valid value. So, immediately the magnitude Time have a value, the trigger will be true. If you want to send a SMS every 10 minutes you should define a trigger "None (always true)" and an action "sends SMS", repeat after "10", "minutes". If you want to send a SMS just once after 10 minutes I have no idea how... A feature ahead is to process Time and Data to be able to set triggers based on time. RE: SMS interface implemented - PaddyB - 2016-08-21 Wasn't sure where to post this but... Have you seen these gsm board not long out? Cost next to nothing, next one will have a gps built in as well.. http://www.myelectronicslab.com/tutorial/a6-gsm-gprs-module-from-ai-thinker/ |