RE: RPI3B+ no hdmi after update [Solved] - Printable Version +- OpenMarine (https://forum.openmarine.net) +-- Forum: OpenPlotter (https://forum.openmarine.net/forumdisplay.php?fid=1) +--- Forum: Bug Reports (https://forum.openmarine.net/forumdisplay.php?fid=4) +--- Thread: RE: RPI3B+ no hdmi after update [Solved] (/showthread.php?tid=1934) |
RE: RPI3B+ no hdmi after update [Solved] - Coltuyn - 2019-08-09 Hi, I wanted to use a RPI3B+ in my shipsytem, currently running on RPI3, so I did a new install on USB using noobs in the RPI3B+. After installation everything Ok, updated using openplotter update button, after update no hdmi connection. During start-upI see the splash screen, followed by the Noobs recovery page, then start-up auto continues, but screen blanks. OP can be connected through VNC, sits in low resolutipn and will not change resolution. Any Ideas? RE: RPI3B+ no hdmi after update - e-sailing - 2019-08-09 You can try to change the resolution with sudo raspi-config. RE: RPI3B+ no hdmi after update [Solved] - Coltuyn - 2019-08-10 (2019-08-09, 10:44 PM)e-sailing Wrote: You can try to change the resolution with sudo raspi-config. That worked, thanks, problem solved! |