OpenPlotter / signalK / Actisense - Printable Version +- OpenMarine (https://forum.openmarine.net) +-- Forum: OpenPlotter (https://forum.openmarine.net/forumdisplay.php?fid=1) +--- Forum: Bug Reports (https://forum.openmarine.net/forumdisplay.php?fid=4) +--- Thread: OpenPlotter / signalK / Actisense (/showthread.php?tid=1946) |
OpenPlotter / signalK / Actisense - juancho38 - 2019-08-16 Hi Everybody, I am not sure it's a bug, but it used to work as far as I remember, I need some help to troubleshoot for my first post ! Since last openplotter update, I get an error with the signalK server NMEA2000 connection to Actisense using serial (Actisense NGT-1 (canboat)) For each incoming messages, I will get a checksum error : Code: Aug 16 14:03:11 openplotter signalk-server[1846]: ERROR 2019-08-16T14:03:11.659Z [actisense-serial] Ignoring message with invalid checksum I am getting used to openplotter with a NMEA simulator. The same configuration works with NMEA0183, say NMEA 0183 / serial (NMEA 0183 Source: Serial, Validate checksum is set) If anybody can help or give me ideas on where to search ... Opeplotter 1.2 alpha / RPT3b+ Cheers. RE: OpenPlotter / signalK / Actisense - juancho38 - 2019-08-17 Some update ... I realized, I had it to work with "Actisense NGT-1 (canboatjs)" NMEA2000 connection. I found this error in Node Red : Quote:17 Aug 07:14:34 - [warn] I am not familiar at all with Node Red, how to "set your own key using the 'credentialSecret' " as stated ... ? Cheers. RE: OpenPlotter / signalK / Actisense - juancho38 - 2019-08-17 Can somebody tell me what is this error message ? Quote:Aug 17 13:50:11 openplotter signalk-server[23347]: DLE followed by unexpected char , ignore message OpenPlotter / signalK / Actisense - tkurki - 2019-08-18 The error messages sound like you are trying to handle non NMEA2000 data as NMEA2000. The Node-RED messages are not related to your data format problem. Can you describe what kind of a setup you have. Sent from my iPhone using Tapatalk RE: OpenPlotter / signalK / Actisense - juancho38 - 2019-08-19 Quote:The error messages sound like you are trying to handle non NMEA2000 data as NMEA2000.The set-up is a NMEA2000 simulator (Windows 10) on COM port, Com0com (virtual COM port pair on WINDOWS), socat command send it over network. On Raspi, socat read it and send it to a virtual serial (pty) Openplotter configured on above pty. I didn' search a linux NMEA2000 simulator ... may be I should I finally made it work by interverting input/output COM on windows ... Don't really understand why ! Well, it works for my needs, fair enough ! Cheers. |