+- OpenMarine (https://forum.openmarine.net)
+-- Forum: OpenPlotter (https://forum.openmarine.net/forumdisplay.php?fid=1)
+--- Forum: General discussion (https://forum.openmarine.net/forumdisplay.php?fid=2)
+--- Thread: Moitessier HAT 2 roadmap (/showthread.php?tid=2152)
RE: Moitessier HAT 2 roadmap - SkipperEarly - 2020-01-21
I had the same problem with RPI3+ and Moitessier 1 and gave up as I also suspect a HW error of the RPI3+.
@ Sailoog: Do you want me to test RPI3+ and Moitessier 1 with a fresh install again?
PS: RPI4 is on order and test currently with RPI3 without Moitessier.
RE: Moitessier HAT 2 roadmap - Sailoog - 2020-01-21
(2020-01-21, 05:59 PM)SkipperEarly Wrote: I had the same problem with RPI3+ and Moitessier 1 and gave up as I also suspect a HW error of the RPI3+.
@ Sailoog: Do you want me to test RPI3+ and Moitessier 1 with a fresh install again?
PS: RPI4 is on order and test currently with RPI3 without Moitessier.
yes please. Test with the latest OpenPlotter Starting edition, get the latest kernel 4.19.93:
Code:
sudo apt update
sudo apt upgradeinstall moitessier hat app and try to download and install the latest driver package 1.4.1
RE: Moitessier HAT 2 roadmap - fishy - 2020-01-22
I have tried the simple Moitessier img file (2020-01-13-OpenPlotter-Moitessier-HAT-v2.0-pre-release-img.zip) but can't get it to boot on my Pi4. The green light keeps blinking in sets of 5, nothing more. No output to screen at all. Tried different apps to write the image, no luck.
The Noobs image however worked like a charm. All set up and good to go, very nice! After updating to the the latest version of PyPilot even the compass / heel/ /pitch sensors were stable, and the scope button worked. (before I kept rotating, about 2 degrees per second, around all axes. No way to calibrate to stop this)
Sweet!
RE: Moitessier HAT 2 roadmap - Sailoog - 2020-01-22
Here my test:
- Raspberry 3B+ and moitessier HAT 1
- Download and install latest OpenPlotter Moitessier HAT edition NOOBS file.
- In first boot skip the system update. kernel is 4.19.75 v7+, preinstalled driver match this kernel. Everything works OK.
- Reboot. Everything works OK.
- Update system to kernel 4.19.93 v7+ and reboot.
- Obviously the installed driver does not match the kernel and moitessier hat does not works. Download and update driver from openplotter-moitessier app to 4.19.93_1.4.1
- Reboot. Everything works OK.
- Disable SPI and I2C from raspberry preferences. System hangs.
- Restart. The system starts nornally with SPI and I2C disabled so no data from the HAT.
- Enable SPI and I2C. Everything works OK.
- Reboot. Everything works OK.
- Put the same SD into Raspberry 4. Everything works OK.
Since it works for me in your same scenario, I do not think we should consider this a bug.
Craig please repeat this procedure and we will try to find out what is going on with your setup. Download the NOOBS file again, corruption sometimes happens.
RE: Moitessier HAT 2 roadmap - Sailoog - 2020-01-22
Again????
http://forum.openmarine.net/showthread.php?tid=2252
Let's go there to try to solve this