[OP2] Serial alias selected device - Printable Version +- OpenMarine (https://forum.openmarine.net) +-- Forum: OpenPlotter (https://forum.openmarine.net/forumdisplay.php?fid=1) +--- Forum: Bug Reports (https://forum.openmarine.net/forumdisplay.php?fid=4) +--- Thread: [OP2] Serial alias selected device (/showthread.php?tid=2230) |
[OP2] Serial alias selected device - glowntiger - 2020-01-11 Hi Sailoog, I have Running Raspberry Pi4 with 2.0.21 If I add an Alias to a serial connection and Apply, the alias is always set to the first device in the list. (See Pictures) If I selected ttySC0 and type sc0 as alias, its added to ttyAMA0 Do I something wrong or is it a bug? RE: [OP2] Serial alias selected device - Sailoog - 2020-01-11 It seems that you have really special devices connected. What is that? Are they connected to the same USB port???? are they virtual devices? RE: [OP2] Serial alias selected device - glowntiger - 2020-01-11 Hi sailoog, Thats the sc16is752 i2c uart devices. Not o.k. for the app? RE: [OP2] Serial alias selected device - Max1947 - 2020-01-11 (2020-01-11, 08:27 PM)glowntiger Wrote: Hi Sailoog, The same thing happens to me too! RE: [OP2] Serial alias selected device - e-sailing - 2020-01-16 The software wasn't tested with sc16is752 devices. But it shouldn't be a problem to add support. But I don't have a sc16is752. RE: [OP2] Serial alias selected device - glowntiger - 2020-01-16 I think we can talk about this on the boot the next days. I bring some boards with me... RE: [OP2] Serial alias selected device - Max1947 - 2020-01-16 (2020-01-16, 09:12 PM)glowntiger Wrote: I think we can talk about this on the boot the next days. I bring some boards with me... Not only can the serial numbers not be changed, if you try to add the CAN connection (MCP2515) with Moitessier installed, SignalK crashes. I guess until you have no Hat Moitessier to try on your card it will be hard ... |