[SOLVED][OP2] Latest beta does not boot on RPI3+ with Moitessier HAT 1 - Printable Version +- OpenMarine (https://forum.openmarine.net) +-- Forum: OpenPlotter (https://forum.openmarine.net/forumdisplay.php?fid=1) +--- Forum: Bug Reports (https://forum.openmarine.net/forumdisplay.php?fid=4) +--- Thread: [SOLVED][OP2] Latest beta does not boot on RPI3+ with Moitessier HAT 1 (/showthread.php?tid=2252) |
RE: [OP2] Latest beta does not boot on RPI3+ with Moitessier HAT 1 - Rooco - 2020-01-24 (2020-01-23, 03:33 PM)emilecantin Wrote: Okay, so you first need to boot without the HAT attached? I can try that, but honestly it kind of lowers the "value" of having a Moitessier version. I'd rather directly install the correct version for my HAT from the regular OpenPlotter 2. There is no need to detach the HAT. Does your system shutdown, hang or reboot? RE: [OP2] Latest beta does not boot on RPI3+ with Moitessier HAT 1 - Sailoog - 2020-01-24 I am trying to reproduce your scenario. emilecantin could you check what is the driver version in your working setup with openplotter 1? Type this in a terminal and copy here: dpkg -s moitessier RE: [OP2] Latest beta does not boot on RPI3+ with Moitessier HAT 1 - emilecantin - 2020-01-24 (2020-01-24, 03:20 PM)Sailoog Wrote: I am trying to reproduce your scenario. Sure, here it is: Code: pi@openplotter:~ $ dpkg -s moitessier And to answer your other question, it looks like it shuts down: the screen goes black, no network connection. The red LED on the Pi stays on, but the green one flashes a few times and then stays off. I tried HDMI safe mode, still the same thing. That happens while it's booting, with the white splash screen and the service names in the bottom left. I can't really see what's the last one, though, it goes too fast. RE: [OP2] Latest beta does not boot on RPI3+ with Moitessier HAT 1 - Sailoog - 2020-01-24 You are running a very old firmware version. I will try to flash a moitessier hat 1 with that. Thanks. RE: [OP2] Latest beta does not boot on RPI3+ with Moitessier HAT 1 - emilecantin - 2020-01-27 (2020-01-24, 04:10 PM)Sailoog Wrote: You are running a very old firmware version. I will try to flash a moitessier hat 1 with that. Thanks. Yeah, as soon as you mentioned firmware updates I thought that might be the issue. There are 2 things I want to emphasize, though:
I'm a Web developer, so I don't know much about Linux drivers, but let me know if there's anything else I can do. RE: [OP2] Latest beta does not boot on RPI3+ with Moitessier HAT 1 - Sailoog - 2020-01-27 Do not worry we are working on it and it will be solved soon. As you said this is a pre-release. From the moment you install, test and report a pre-release you are involved in the development. We are getting more than 150 daily downloads of the pre-releases and this is great because people is torturing the system and finding bugs we would never find. But more than 150 daily persons during 2 month is too much people and many of them do not feel they are involved in development. Lesson learned. RE: [OP2] Latest beta does not boot on RPI3+ with Moitessier HAT 1 - SkipperEarly - 2020-01-27 (2020-01-23, 05:19 PM)Sailoog Wrote: Please could someone experimenting this issue (different than emilecantin) try this: have followed above (rpi3+, strompi3 and Moit-hat 1) and after installing op-moitessier kernel version xx.93 system reboots but hangs with both moitessier green LEDs full on. RE: [OP2] Latest beta does not boot on RPI3+ with Moitessier HAT 1 - emilecantin - 2020-01-27 (2020-01-27, 03:45 PM)Sailoog Wrote: Do not worry we are working on it and it will be solved soon. That's great to hear. I _am_ feeling involved, don't worry. That's why I wanted to underscore the importance of this class of bugs, but I understand that you might be getting swamped. I'll try to torture test other parts of OP2 in the meantime! RE: [OP2] Latest beta does not boot on RPI3+ with Moitessier HAT 1 - SkipperEarly - 2020-01-30 Maybe my latest testing helps to find a solution. Have stated testing from scratch again Rpi4 (4gb), Moitessier 1, 2020-01-13-OpenPlotter-Headless-v2.0.img did NOT update the kernel to xx.93 (as this seemed to me causing all this troubles) copied the deb files and cannot install moitessier hat kernel as install function remains disabled. have then installed moit-hat manually with sudo dpkg -i ~/home/pi/.openplotter/moitessier/moitessier_4.19.75_1.4.0_armhf.deb rebooted and system restarts but hangs. both green LEDs solid (hat) and raspi power red LED also solid - nothing flashing. See screenshots for details. RE: [OP2] Latest beta does not boot on RPI3+ with Moitessier HAT 1 - Sailoog - 2020-01-30 Thanks SkipperEarly, any info helps. We keep working on this |