tinypilot on RPI3 - Printable Version +- OpenMarine (https://forum.openmarine.net) +-- Forum: Pypilot (https://forum.openmarine.net/forumdisplay.php?fid=17) +--- Forum: General discussion (https://forum.openmarine.net/forumdisplay.php?fid=18) +--- Thread: tinypilot on RPI3 (/showthread.php?tid=2333) |
tinypilot on RPI3 - Ola_H - 2020-02-16 HI I try to run the tiny pilot image on a RPI3B. Doesn't work, doesn't start. Files on SD seems readable and so on. Whats wrong? Any modifications that needs to be made before running on a RPI3B? best wishes RE: tinypilot on RPI3 - seandepagnier - 2020-02-16 I just tried tinypilot on a 3b+ and it works. Which image? Does the same sd card work in a zero? RE: tinypilot on RPI3 - Ola_H - 2020-02-16 (2020-02-16, 04:46 PM)seandepagnier Wrote: I just tried tinypilot on a 3b+ and it works. Which image? Does the same sd card work in a zero? Ive tried both tinypilot_21122019.img and tinypilot_28062019.img None of them is working on RPI3B+. Have no zero to test on. This SD could be bad in some way, but it's readable... RE: tinypilot on RPI3 - Baltic Sailor - 2020-02-16 Tinypilot works on RP2+ and 3+. one thing I noticed that I had to use a Wifi dongle. I could be wrong that if was a Raspberry 2 could also have been with the RP1 not sure anymore. When it didn't start plugged the WIFI dongle into the usb slot and the raspberry booted. ( I have a the complete serie 1,2,3 and 4. Tinypilot works on RP2+ and 3+. one thing I noticed that I had to use a Wifi dongle. I could be wrong that if was a Raspberry 2 could also been with the RP1 not sure anymore. When it didn't start plugged the WIFI dongle into the usb slot and the raspberry booted. ( I have a the complete serie 1,2,3 and 4. RE: tinypilot on RPI3 - seandepagnier - 2020-02-17 I'm looking to do a complete upgrade of tinypilot in a few months which will support the pi4 as well which should fix this. RE: tinypilot on RPI3 - xfactor99 - 2020-02-17 I´m runing Tinypilot IMG21122019 on an RPI 3b+ with no problems. Greetings Andreas RE: tinypilot on RPI3 - Ola_H - 2020-02-18 (2020-02-17, 07:04 PM)xfactor99 Wrote: I´m runing Tinypilot IMG21122019 on an RPI 3b+ with no problems. Good to hear. 1. unpack 2. burn .img to SD 3. put SD into RPI3B+ 4. start RPI and then? some step Ive missed? Monitor shows just the color screen. No access point is going up from RPI. best wishes Ola RE: tinypilot on RPI3 - seandepagnier - 2020-02-18 can the same sd card boot a different pi? Does the same pi work with openplotter image? Are there two versions of the 3b+? Can you try a different raspberry pi? RE: tinypilot on RPI3 - xfactor99 - 2020-02-18 (2020-02-18, 03:43 PM)Ola_H Wrote:(2020-02-17, 07:04 PM)xfactor99 Wrote: I´m runing Tinypilot IMG21122019 on an RPI 3b+ with no problems. Hi Ola, the TP is headless, so I don´t know if a Monitor is suported. An AccessPoint with the SSID "Pypilot" should comming up ... Mayby you try to unplug anything except the power cable on the RPI 3b+.... What computer and programm you use to burn the image ? Good luck Andreas |