GPSD data to signal k [solved] - Printable Version +- OpenMarine (https://forum.openmarine.net) +-- Forum: OpenPlotter (https://forum.openmarine.net/forumdisplay.php?fid=1) +--- Forum: How do I...? (https://forum.openmarine.net/forumdisplay.php?fid=3) +--- Thread: GPSD data to signal k [solved] (/showthread.php?tid=2628) |
GPSD data to signal k [solved] - pabben - 2020-06-06 I have a GNSS/GPS reciever that is working perfectly in opencpn. It is connected with GPSD-protocol and port 2947. How can i get that data to signal k so i can access it in the dashboards? RE: GPSD data to signal k - holgerw - 2020-06-06 (2020-06-06, 12:33 AM)pabben Wrote: I have a GNSS/GPS reciever that is working perfectly in opencpn. just make an new connection in SignalK Server: the new server dont like my screenshot: so "new connection" enabled true id gpsd nmea source GPSD Host localhost Port 2947 sentence event (empty) validate checksum true remove NULL no thats all. holger RE: GPSD data to signal k - pabben - 2020-06-06 Fantastic! Thank you very much! I tried the same settings but i named "ID" to "GNSS". Changed it to "gpsd" and restarted signal K-server did the trick! RE: GPSD data to signal k [solved] - Sailoog - 2020-06-07 Remove your gpsd connetion in opencpn. Data will be sent through tcp loaclhost 10110 to opencpn. there is something weird with attached images after migration, they will appear at the end of the page when you click them. investiganting... RE: GPSD data to signal k - partyvi - 2020-07-25 PLEASE HELP!I have the same issue.But do not see GPSD as NMEA source on my OP2 please help. Do i need to install some plugin or so? Viktor (2020-06-06, 08:26 PM)holgerw Wrote:(2020-06-06, 12:33 AM)pabben Wrote: I have a GNSS/GPS reciever that is working perfectly in opencpn. RE: GPSD data to signal k [solved] - holgerw - 2020-07-25 hi partyvi gpsd speaks only NMEA 0183 NOT NMEA 2000. how |