Wifi Speed Increase on Openplotter AP - Printable Version +- OpenMarine (https://forum.openmarine.net) +-- Forum: OpenPlotter (https://forum.openmarine.net/forumdisplay.php?fid=1) +--- Forum: How do I...? (https://forum.openmarine.net/forumdisplay.php?fid=3) +--- Thread: Wifi Speed Increase on Openplotter AP (/showthread.php?tid=2639) |
Wifi Speed Increase on Openplotter AP - andy kopac - 2020-06-08 Is there a way to increase the wifi speed on the access point on Openplotter RPI? Especially the 2.4ghz. I don't mind if I have to add a USB dongle. Currently I get 64.8Mbps on the onboard 2.4ghz and 150Mbps on 5ghz. I tried a usb 2.4ghz 300Mbs dongle and it still only let me have 64.8Mbps. Running it with a RPI3B+ and Moitessier ver. 1 board and WAN side Mikrotik Groove G-52HPacn Booster/antenna. I'll be adding cellular later. Thanks Andy RE: Wifi Speed Increase on Openplotter AP - holgerw - 2020-06-09 you have only 3 usable channels on 2.4 WiFI because of overlapping frequencies. Try to use another channel if it is used nearby. Channel 1, 6, 11 are mostly used here in Austria. RE: Wifi Speed Increase on Openplotter AP - andy kopac - 2020-06-11 What I was hoping was to be able to get 150 0r 300 Mbps. Is there any configuration files I can tweak to to bump up the speed |