RPI 4 + StromPi + BatteryHAT + MoitessierHAT 2 - Printable Version +- OpenMarine (https://forum.openmarine.net) +-- Forum: OpenPlotter (https://forum.openmarine.net/forumdisplay.php?fid=1) +--- Forum: How do I...? (https://forum.openmarine.net/forumdisplay.php?fid=3) +--- Thread: RPI 4 + StromPi + BatteryHAT + MoitessierHAT 2 (/showthread.php?tid=2656) |
RPI 4 + StromPi + BatteryHAT + MoitessierHAT 2 - Relentless - 2020-06-14 Hi all. I'm new to this forum and I have a problem I can't figure out. I have a setup with an RPI 4 4G, StromPi V3 HAT, Strompi BatteryHAT and MoitessierHAT 2. When I use the Openplotter image on the SD-card and try to run the script and GUI for the StromPi HAT, nothing works. Settings don't change, GUI doesn't start. I've tried to take te Raspian Buster image that you can download from the strompi website, which has everything pre-installed neccesary for the strompi and I've installed OpenPlotter on top of that following the 'Advanced' manual on the Sailoog website. This works fine, until I install the MoitessierHAT package. When I try to reboot after installing the MoitessierHAT package, the Pi doesn't boot anymore. Does anyone have experience with this setup? Sebastiaan RE: RPI 4 + StromPi + BatteryHAT + MoitessierHAT 2 - Sailoog - 2020-06-16 Never tested an Strompi HAT. does it works with the OpenPlotter image including moitessier app but whitout connecting th moitessier hat? Your second error could be related to this: https://forum.openmarine.net/showthread.php?tid=2633 RE: RPI 4 + StromPi + BatteryHAT + MoitessierHAT 2 - Relentless - 2020-07-04 (2020-06-16, 06:17 PM)Sailoog Wrote: Never tested an Strompi HAT. does it works with the OpenPlotter image including moitessier app but whitout connecting th moitessier hat? Thank you so much for your answer! Whether the Moitessier Hat was connected or not didn't make any difference. We followed the instructions we found in the thread you mentioned: Installation process – Scenario 1
RE: RPI 4 + StromPi + BatteryHAT + MoitessierHAT 2 - nebosa - 2020-07-05 Hello, did step 13 really work? RE: RPI 4 + StromPi + BatteryHAT + MoitessierHAT 2 - Relentless - 2020-07-05 (2020-07-05, 11:55 AM)nebosa Wrote: Hello, did step 13 really work? Hi, no. At the and of our post we’ve explained that it didn’t work RE: RPI 4 + StromPi + BatteryHAT + MoitessierHAT 2 - nebosa - 2020-07-05 thats how it works: https://forum.openmarine.net/showthread....0#pid14580 I got it going like this. If you copy the file manually, the driver is also available in the HAT config menu after the reboot and can also be installed from there. Sailoog thinks it is also possible with the script, but unfortunately not for everyone Sad It works with me. I also boot from SSD with the new bootloader which is now stable. sorry new link: https://forum.openmarine.net/showthread.php?tid=2633&pid=14580#pid14580 |