Connect inverter with RS-232 to raspberry PI4 - Printable Version +- OpenMarine (https://forum.openmarine.net) +-- Forum: OpenPlotter (https://forum.openmarine.net/forumdisplay.php?fid=1) +--- Forum: How do I...? (https://forum.openmarine.net/forumdisplay.php?fid=3) +--- Thread: Connect inverter with RS-232 to raspberry PI4 (/showthread.php?tid=3918) |
Connect inverter with RS-232 to raspberry PI4 - nuvolare - 2022-02-10 Hello, as on the Subject, i'm tring to connect my inverter for solar power to the raspberry pi4 through an RS-232 cable wit usb converter. As you can sea in the pictures the port ttyUSB0 is set but on the Dashboard there is no signal. Can you help me? RE: Connect inverter with RS-232 to raspberry PI4 - holgerw - 2022-02-11 you have double acces to the serial port now. disable your data connect in signalk and let op-serial do it via connections-tab. RE: Connect inverter with RS-232 to raspberry PI4 - nuvolare - 2022-02-11 I'm not very familiar with signalk, so maybe i did two connections. Anyway, in wich menù can i disable my data connections? RE: Connect inverter with RS-232 to raspberry PI4 - holgerw - 2022-02-11 in signalk the connections are in server / data connections. have fun RE: Connect inverter with RS-232 to raspberry PI4 - PaddyB - 2022-02-11 (2022-02-11, 11:40 AM)nuvolare Wrote: I'm not very familiar with signalk, so maybe i did two connections. Anyway, in wich menù can i disable my data connections? Go to the data connections page on the server, there's a delete option bottom right when you edit/add a connection. Then use the connections tab on the openplotter serial app to let openplotter set up the connections in signalk. https://openplotter.readthedocs.io/en/2.x.x/serial/serial_app.html RE: Connect inverter with RS-232 to raspberry PI4 - nuvolare - 2022-02-11 ok, so i've removed the connection by usb cable, and it was red, after that i puted again and it was green after refresh. I've deleted the serial from the application string, i'had to set up the device from openplotter/serial and "Add to signal K", but notting is changed, on Dashboard, there is no signal on right up corrner of the signal K. I don't know what i've to do |