Client mode R Pi3 problems - Printable Version +- OpenMarine (https://forum.openmarine.net) +-- Forum: OpenPlotter (https://forum.openmarine.net/forumdisplay.php?fid=1) +--- Forum: How do I...? (https://forum.openmarine.net/forumdisplay.php?fid=3) +--- Thread: Client mode R Pi3 problems (/showthread.php?tid=4198) |
Client mode R Pi3 problems - lefevrebreeze - 2022-08-28 Hi Sean and forum, My instance of Pypilot has been existing happily for 2 years in AP mode on a Ras Pi 3 B. This weekend I finally installed my OpenPloteer chart plotter on board - running on a Rasp Pi 4. I have the intention of sharing information to/from pypilot however the box I have pypilot installed on refuses to connect in client mode. Similar error codes appear in R Pi forums however the workarounds are unavailable because of the tinycore OS at the heart of Pypilot. I have posted two error message screen shots. Can anyone offer some insight? Other error that appears on the terminal when running: ifup wlan0 Returns “/etc/network.conf” not found sudo iwlan wlan0 scan Returns “Failed to initiate sched scan” The image is a fresh install and the problem existed on earlier images. The pi comments to a network using Raspbian all thoughts are appreciated |