[SOLVED] O charts wrong userkey on V0.10.1 - Printable Version +- OpenMarine (https://forum.openmarine.net) +-- Forum: OpenPlotter (https://forum.openmarine.net/forumdisplay.php?fid=1) +--- Forum: Bug Reports (https://forum.openmarine.net/forumdisplay.php?fid=4) +--- Thread: [SOLVED] O charts wrong userkey on V0.10.1 (/showthread.php?tid=460) |
[SOLVED] O charts wrong userkey on V0.10.1 - PaddyB - 2017-04-12 After downloading the new V0.10.0 image and updating to v0.10.1 , opencpn won't load the Spanish oeSENC charts I bought from O charts, wrong Userkey comes up. Any ideas how to rectify this ? TIA RE: O charts wrong userkey on V0.10.1 - Sailoog - 2017-04-12 That should not happen. Have you recovered the system from NOOBS? or are you trying to use a different raspberry/SD combination? If you want to keep your oeSENC/S-63 license you have to use the same raspberry and the same SD card where you created the fingerprint. If you recover the system or you make a backup of your SD using the tool that raspbian includes, it won't work. If you make a image of your SD using the normal way you can have as working copies as you want to use on the same raspberry. RE: O charts wrong userkey on V0.10.1 - PaddyB - 2017-04-14 (2017-04-12, 05:25 PM)Sailoog Wrote: That should not happen.Hmm, not getting very far, I tried a fresh NOOBS V0.10.0 on the card where the fingerprint file was created after a full format using Windows sd card tools and also copying a working V0.10.0 onto the same card via the Pi menu but neither work with oeSENC bought charts, I'll try checking fingerprint files later... Sent from my SGP511 using Tapatalk RE: O charts wrong userkey on V0.10.1 - Sailoog - 2017-05-16 Recovering the system from NOOBS or installing NOOBs again are interpreted as new system and your chartset will not work. I guess we should document this. As this is not an openplotter issue, please write to info<youknowwhat>o-charts.org and we will make your charts work again there. |