[SOLVED] v0.11.5 SPI senors - cant delete a SignalK tag - Printable Version +- OpenMarine (https://forum.openmarine.net) +-- Forum: OpenPlotter (https://forum.openmarine.net/forumdisplay.php?fid=1) +--- Forum: Bug Reports (https://forum.openmarine.net/forumdisplay.php?fid=4) +--- Thread: [SOLVED] v0.11.5 SPI senors - cant delete a SignalK tag (/showthread.php?tid=496) |
[SOLVED] v0.11.5 SPI senors - cant delete a SignalK tag - affinite - 2017-05-15 in SPI Sensors tab, there is no facility to delete a MCP3008 input channel/SignalK tag. I can change the SK tag but cant delete the input altogether RE: v0.11.5 SPI senors - cant delete a SignalK tag - e-sailing - 2017-05-15 Also if you don't have any MCP3008 it will show you the 8 inputs. If nothing is activ, it is disabled. You are right you can't delete the SK name. (Not nice but not a bug. You can edit signalk names behind "mcp =" in the openplotter.conf but make a backup copy of the file) RE: v0.11.5 SPI senors - cant delete a SignalK tag - Sailoog - 2017-05-15 Maybe SPI needs some cosmetic revision but I think is working well. I will mark this issue as [SOLVED] if you agree. RE: v0.11.5 SPI senors - cant delete a SignalK tag - affinite - 2017-05-15 (2017-05-15, 06:03 PM)Sailoog Wrote: Maybe SPI needs some cosmetic revision but I think is working well. I will mark this issue as [SOLVED] if you agree. I think it would be better if you could clear the SKname parameter/field but if the only way is to assign an unused SKname then so be it. |