OpenMarine
dual boot - Printable Version

+- OpenMarine (https://forum.openmarine.net)
+-- Forum: OpenPlotter (https://forum.openmarine.net/forumdisplay.php?fid=1)
+--- Forum: How do I...? (https://forum.openmarine.net/forumdisplay.php?fid=3)
+--- Thread: dual boot (/showthread.php?tid=659)

Pages: 1 2


dual boot - jim321 - 2017-08-03

how do i load kodi as a second os..?
it would be nice to use my video library at anchor.

Thank
jim


RE: dual boot - jim321 - 2017-08-04

i ended up installing vlc that should be enough for me..Smile


RE: dual boot - Sailoog - 2017-08-06

Press shint while starting an enter into NOOBS menu being connected to internet. You can install kodi in parallel with OP there.


RE: dual http://forum.openmarine.net/showthread.php?tid=659boot - jim321 - 2017-08-09

how do i add kodi to the list. openplotter is the only option.
i cant get sound on hdmi with op
jim


RE: dual boot - Sailoog - 2017-08-10

You must connect to internet. Click "wifi networks" and provide your wifi connection data, the a list of availables OS will be downloaded.

Kodi for raspberry is LibreELEC.


RE: dual boot - jim321 - 2017-08-11

the tab for wifi networks is greyed out tried disable ap and connected to my wifi ,.ethernet ,plugged in another usb wifi "alfa" always stays gray the online info tab is the same..
jim


RE: dual boot - Sailoog - 2017-08-11

Is your raspberry model 2 witout wifi built in? anuway, connected to your router by ethernet should work... strange


RE: dual boot - jim321 - 2017-08-12

no i have the raspberry-3 i am using it to write this.


RE: dual boot - jim321 - 2017-08-16

i had to reinstall op so i formatted sd started from the beginning and the tabs are still greyed out with Ethernet connected????
i tried it first thing after it installed before updates..
jim


RE: dual boot - JD1 - 2017-08-16

I am not exactly clear on what your setup is but could it be that you have the internal WIFI set up as an access point? If so, it would not be available for other work and the tab might be grayed out ..... just a WAG
This would be OpenPlotter, WiFi AP tab, enable access point at the top left of the screen .
Are you using a Raspberry 3 or a Raspberry 3B .... I don't think the 3 has wifi but the 3B does.