+- OpenMarine (https://forum.openmarine.net)
+-- Forum: OpenPlotter (https://forum.openmarine.net/forumdisplay.php?fid=1)
+--- Forum: How do I...? (https://forum.openmarine.net/forumdisplay.php?fid=3)
+--- Thread: IMU not detected (/showthread.php?tid=66)
IMU not detected - SYWindveer - 2016-04-27
Hello,
This is my first post here.
I am running OP 7.0.1b on my RPi 2 and so far I am impressed.
OP does a lot of things I have been tinkering with for a while.
Now I found this MPU-92/65 but I can't get it to work.
This is an 9255 IMU supposedly compatible with a 9250.
Anyway OP does not detect it.
pi@openplotter:~ $ python /home/pi/.config/openplotter/imu/check_sensors.py
none
0
none
none
pi@openplotter:~ $ sudo i2cdetect -y 1
0 1 2 3 4 5 6 7 8 9 a b c d e f
00: -- -- -- -- -- -- -- -- -- -- -- -- --
10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
20: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
30: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
40: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
50: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
60: -- -- -- -- -- -- -- -- 68 -- -- -- -- -- -- --
70: -- -- -- -- -- -- -- --
pi@openplotter:~ $
Am I out of luck or is there a way to make it work?
Kind regards,
RE: IMU not detected - e-sailing - 2016-04-27
Have a look here
https://github.com/richards-tech/RTIMULib2
"
Other versions
RTIMULib2 has been extended to support some other IMUs:
HMC5883L/ADXL345/L3G4200D - https://github.com/jeff-loughlin/RTIMULib2
MPU-9255 - https://github.com/Nick-Currawong/RTIMULib2
Thanks to those people for their work.
"
So there is a chance but it does not work out of the box at the moment.
git clone https://github.com/Nick-Currawong/RTIMULib2
....
RE: IMU not detected - SYWindveer - 2016-04-28
(2016-04-27, 10:57 PM)e-sailing Wrote: Have a look here
https://github.com/richards-tech/RTIMULib2
"
Other versions
RTIMULib2 has been extended to support some other IMUs:
HMC5883L/ADXL345/L3G4200D - https://github.com/jeff-loughlin/RTIMULib2
MPU-9255 - https://github.com/Nick-Currawong/RTIMULib2
Thanks to those people for their work.
"
So there is a chance but it does not work out of the box at the moment.
git clone https://github.com/Nick-Currawong/RTIMULib2
....
Thanks very much for pointing me to that Github repository.
I will try to get it installed over the weekend.
I'll report back if it works, ( or not )
RE: IMU not detected - SYWindveer - 2016-05-08
(2016-04-28, 07:14 PM)SYWindveer Wrote:I have been reading a lot on this subject lately, but I have not been able to get this library installed on a linux system. On Arduino it works , I guess the easiest solution is to buy an IMU that is supported by OP.(2016-04-27, 10:57 PM)e-sailing Wrote: Have a look here
https://github.com/richards-tech/RTIMULib2
"
Other versions
RTIMULib2 has been extended to support some other IMUs:
HMC5883L/ADXL345/L3G4200D - https://github.com/jeff-loughlin/RTIMULib2
MPU-9255 - https://github.com/Nick-Currawong/RTIMULib2
Thanks to those people for their work.
"
So there is a chance but it does not work out of the box at the moment.
git clone https://github.com/Nick-Currawong/RTIMULib2
....
Thanks very much for pointing me to that Github repository.
I will try to get it installed over the weekend.
I'll report back if it works, ( or not )