[SOLVED] Upgraded to 14 - no openplotter! - Printable Version +- OpenMarine (https://forum.openmarine.net) +-- Forum: OpenPlotter (https://forum.openmarine.net/forumdisplay.php?fid=1) +--- Forum: Bug Reports (https://forum.openmarine.net/forumdisplay.php?fid=4) +--- Thread: [SOLVED] Upgraded to 14 - no openplotter! (/showthread.php?tid=660) |
[SOLVED] Upgraded to 14 - no openplotter! - Sderbyshire - 2017-08-03 Help! - turned on the pi this afternoon and was prompted to upgrade to alpha 14 Did so, and now the openplotter app ( anchor icon) wont run. The anchor splash screen appears briefly, then nothing Reboot says there is another upgrade available 14.1, but how do i run that without openplotter? Steve RE: Upgraded to 14 - no openplotter! - Sailoog - 2017-08-03 open a terminal, type openplotter and copy here the error RE: Upgraded to 14 - no openplotter! - lordzahl - 2017-08-03 I have also just updated (30min ago) and the same problem: pi@openplotter:~ $ openplotter Traceback (most recent call last): File "/home/pi/.config/openplotter/openplotter", line 3503, in <module> MainFrame().Show() File "/home/pi/.config/openplotter/openplotter", line 267, in __init__ self.read_i2c() File "/home/pi/.config/openplotter/openplotter", line 1873, in read_i2c self.list_i2c.Append([str©, name, address, magn_list[c], iii[0], str(iii[1]), str(iii[2])]) UnboundLocalError: local variable 'magn_list' referenced before assignment btw. i think it would be great if you could give pointers to your build system, so people could help with the development. E.g. i see the repositories for openplotter on github, but does not know where the code on my raspberry is etc. So it is hard to debug myself & help at the moment. Thanks for the great software! RE: Upgraded to 14 - no openplotter! - Sderbyshire - 2017-08-03 Traceback (most recent call last): File "/home/pi/.config/openplotter/openplotter", line 3519, in <module> MainFrame().Show() File "/home/pi/.config/openplotter/openplotter", line 267, in __init__ self.read_i2c() File "/home/pi/.config/openplotter/openplotter", line 1889, in read_i2c self.list_i2c.Append([str©, name, address, magn_list[c], iii[0], str(iii[1]), str(iii[2])]) IndexError: list index out of range RE: Upgraded to 14 - no openplotter! - jim321 - 2017-08-03 i try to update from remote desktop it starts then disconnects when i log back in it is still 0.13.1 RE: Upgraded to 14 - no openplotter! - Sderbyshire - 2017-08-03 one additional thing i have noticed, my imu is no longer showing up correctly in node-red dashboard is this an i2c problem? steve RE: Upgraded to 14 - no openplotter! - Sailoog - 2017-08-03 Ok, I see, sorry. You had an IMU defined. Go to: /home/pi/.config/openplotter/openplotter.conf or /home/pi/.openplotter/openplotter.conf and edit and delete all I2C sensors: [I2C] sensors = Now, this is how IMUs work: https://sailoog.gitbooks.io/openplotter-documentation/content/en/compass.html RE: Upgraded to 14 - no openplotter! - lordzahl - 2017-08-03 (2017-08-03, 06:54 PM)Sailoog Wrote: Ok, I see, sorry. You had an IMU defined. The fix works! Thanks. The first pypilot release, great! RE: Upgraded to 14 - no openplotter! - Sderbyshire - 2017-08-03 Thanks Sailoog, Openplotter now running took a quick look at the imu config, COOL ! steve RE: Upgraded to 14 - no openplotter! - jim321 - 2017-08-03 that looks sweet i need a new imu now they sent me a QMC5883 i was trying to adapt that with an arduino .. thanks jim |