+- OpenMarine (https://forum.openmarine.net)
+-- Forum: OpenPlotter (https://forum.openmarine.net/forumdisplay.php?fid=1)
+--- Forum: Bug Reports (https://forum.openmarine.net/forumdisplay.php?fid=4)
+--- Thread: i2c, SPI not working, error in debug when restarting sk (/showthread.php?tid=677)
i2c, SPI not working, error in debug when restarting sk - Saqqara - 2017-08-10
Debug window errors:
https://www.screencast.com/t/nAEA6QTgnsM
sorry for the image.
I have an MCP3008 that isn't sending my battery voltage as before, and my BMP180 and my HTU21D aren't generating data though I seem to have them set up.
14.4
RE: i2c, SPI not working, error in debug when restarting sk - Sailoog - 2017-08-10
It seems that your update attempt failed and there are not installed packages. Probably you come from a fresh 0.10.0 install. There was a solved issue that could be the cause of your failed update.
Try again. To force update when you are running the last one, type:
Code:
/home/pi/.config/openplotter/update/update_OpenPlotter.sh