signalk roll/heel ; AIS ; Wait-Tab - Printable Version +- OpenMarine (https://forum.openmarine.net) +-- Forum: OpenPlotter (https://forum.openmarine.net/forumdisplay.php?fid=1) +--- Forum: How do I...? (https://forum.openmarine.net/forumdisplay.php?fid=3) +--- Thread: signalk roll/heel ; AIS ; Wait-Tab (/showthread.php?tid=730) |
RE: signalk roll/heel ; AIS ; Wait-Tab - Sailoog - 2017-09-22 (2017-09-19, 09:39 PM)Luckbert Wrote: Hello, Let me check this. Are you aware of units on diagnostics window? they are radians and calibration window are degrees. RE: signalk roll/heel ; AIS ; Wait-Tab - Luckbert - 2017-09-22 Ok, thx RE: signalk roll/heel ; AIS ; Wait-Tab - Sailoog - 2017-09-22 You are right. Even changing units to degrees signal k roll value is showing pypilot roll value and not pypilot heel value. I will try to fix this tomorrow. Thanks!! RE: signalk roll/heel ; AIS ; Wait-Tab - Luckbert - 2017-09-22 Cool!!! I am very happy! RE: signalk roll/heel ; AIS ; Wait-Tab - Luckbert - 2017-09-26 @ sailoog Could you achieve something? RE: signalk roll/heel ; AIS ; Wait-Tab - Sailoog - 2017-09-26 Sorry luckbert, it has been a hard week here in Catalonia and no much time to work on OP. Do not worry this is in the list: https://github.com/sailoog/openplotter/projects/1 RE: signalk roll/heel ; AIS ; Wait-Tab - Luckbert - 2017-09-26 RE: signalk roll/heel ; AIS ; Wait-Tab - jim321 - 2017-10-01 i would like to get roll heel or level i don't care what you call it.. to a gauge on the dashboard without it zeroing out too. jim [attachment=163] RE: signalk roll/heel ; AIS ; Wait-Tab - Sailoog - 2017-10-08 Fixed on next release. Closing issue. RE: signalk roll/heel ; AIS ; Wait-Tab - Luckbert - 2017-10-08 OK, 0.15.2 , 0.16.0 or 1.0.0 ? |