One Wire serial number selection - Printable Version +- OpenMarine (https://forum.openmarine.net) +-- Forum: OpenPlotter (https://forum.openmarine.net/forumdisplay.php?fid=1) +--- Forum: Feature Requests (https://forum.openmarine.net/forumdisplay.php?fid=5) +--- Thread: One Wire serial number selection (/showthread.php?tid=756) |
One Wire serial number selection - JD1 - 2017-09-13 When there are more than a handful of one wire temperature sensors involved, it gets awkward to select a serial number that goes with a particular measurement. I seem to remember that at one time, when selecting sensor ID's to assign, only the ID's that were not assigned showed up. Now maybe my brain is getting a bit fuzzy and this didn't actually happen but it would be a better way of going than the current method where I have to manually figure out if a particular serial number has been assigned or if it is free. The current method is of value in certain circumstances but it would be really nice if we could have a choice of displaying all serial numbers or only the serial numbers that are currently not assigned. |