RDP-in to a new installation - Printable Version +- OpenMarine (https://forum.openmarine.net) +-- Forum: OpenPlotter (https://forum.openmarine.net/forumdisplay.php?fid=1) +--- Forum: How do I...? (https://forum.openmarine.net/forumdisplay.php?fid=3) +--- Thread: RDP-in to a new installation (/showthread.php?tid=762) |
RDP-in to a new installation - ElbeTaxi - 2017-09-15 I new-installed OP off-site, because i have no display for the OP on my boat. I took the Raspy to the boat, plugged in the USB hub with the GPS and AIS and powered it up. I can SSH-in, but not RDP-in. Its connected via LAN to a 4G Router. That means i dont use WLAN on the Raspy, neither for Connection, nor for Accesspoint. Does RDP for the LAN needs to be avtivated somewhere? And, if so, is there a way to do it by SSH? I really love OP. But since NOOBS is the only avaiable image, i had not one day in this summer with a running OP. Every time i prepared a Raspi for the boat at home, something went wrong when i took it to the boat and tried to connect it headless to my boats LAN or WLAN. Its a little bit frustrating... Any help very appreciated, thx in advance! RE: RDP-in to a new installation - Sailoog - 2017-09-15 OP version? 0.10.0 version has an issue with RDP, you need to update to latest Have you tried by VNC? There will be NOOBS and img for next image. RE: RDP-in to a new installation - ElbeTaxi - 2017-09-15 (2017-09-15, 04:47 PM)Sailoog Wrote: OP version? 0.10.0 version has an issue with RDP, you need to update to latest Hi Sailog, it is 0.15. RE: RDP-in to a new installation - Sailoog - 2017-09-15 If you are connecting through a router I guess you have to open ports. Usually default SSH 22 port is open on routers. VNC default port is 5900 and RDP is 3389, I think... RE: RDP-in to a new installation - ElbeTaxi - 2017-09-15 Hi Sailog, thanks for your attention! But this cant be the problem, because i try to connect from inside my LAN. |