Scan Charts & Calibrate into OpenCPN ? - Printable Version +- OpenMarine (https://forum.openmarine.net) +-- Forum: OpenPlotter (https://forum.openmarine.net/forumdisplay.php?fid=1) +--- Forum: How do I...? (https://forum.openmarine.net/forumdisplay.php?fid=3) +--- Thread: Scan Charts & Calibrate into OpenCPN ? (/showthread.php?tid=782) |
Scan Charts & Calibrate into OpenCPN ? - Leigh - 2017-09-30 Hi, Love OP, but there are (I can find) no charts for OpenCPN for Lisbon and the R. Tejo (Targus) where I sail What I have done for Pathaway is to scan my paper charts and then calibrate them using the tools on their website. Is there a nice simple step by step for this for OpenCPN? If not, some hints so that I can make one? I much prefer Linux, but can also boot into Windows 10 Thanks Leigh RE: Scan Charts & Calibrate into OpenCPN ? - Vamonos - 2017-10-01 (2017-09-30, 11:45 PM)Leigh Wrote: Hi, I don't know if these will help you, but here are a couple of tools listed on the Open on page https://opencpn.org/wiki/dokuwiki/doku.php?id=opencpn:supplementary_software:chart_conversion_manual:chart_conversion Richard RE: Scan Charts & Calibrate into OpenCPN ? - Luckbert - 2017-10-01 This ist very good. http://www.the-thorns.org.uk/mapping/ RE: Scan Charts & Calibrate into OpenCPN ? - Leigh - 2017-10-01 (2017-10-01, 12:13 AM)Vamonos Wrote:Thanks Richard. Will take a look(2017-09-30, 11:45 PM)Leigh Wrote: Hi, Sent from my SM-A310F using Tapatalk Vielen danke! Obwohl ich habe uberhaupt keine Deutsche seit 10 jahr gesprochen (nur Portuguesich), kann ich ein bischen Deutsch. Habe ich 5 jahren hinten von die oestfriesiche inseln gesegelt, auf Horrumersiel. Tolle segeln, strande, Leute und Jever! Hat mich errinert von meine heimat am Thamse munding - bin ich eine richtiger Inselaffe OK now after reading my horrible German you should never worry about writing in English [emoji23] [emoji23] Sent from my SM-A310F using Tapatalk RE: Scan Charts & Calibrate into OpenCPN ? - Leigh - 2017-10-01 Great, Thanks Just bought John's MAPC2MAPC, exactly what I wanted very easy jpeg or whatever scan to calibrated map Cheers RE: Scan Charts & Calibrate into OpenCPN ? - PaddyB - 2017-10-01 To add google earth inages, which can be useful as an extra nav source, the venture further opencpn plug is easy to use. Also, ge2kap can convert navionics from sasplanet to raster KAP files. Bit involved but it works for the latest chart data. RE: Scan Charts & Calibrate into OpenCPN ? - waterman480 - 2017-10-08 The tutorials for GE2KAP are here: https://onedrive.live.com/?authkey=!AOZ2eHjJaiMT9yE&id=E42CE519717DF71B!1339&cid=E42CE519717DF71B RE: Scan Charts & Calibrate into OpenCPN ? - Leigh - 2017-10-08 (2017-10-08, 04:08 AM)waterman480 Wrote: The tutorials for GE2KAP are here: https://onedrive.live.com/?authkey=!AOZ2eHjJaiMT9yE&id=E42CE519717DF71B!1339&cid=E42CE519717DF71B Thanks! |