openplotter v0.10.0alpha : hostapd not starting - Printable Version +- OpenMarine (https://forum.openmarine.net) +-- Forum: OpenPlotter (https://forum.openmarine.net/forumdisplay.php?fid=1) +--- Forum: How do I...? (https://forum.openmarine.net/forumdisplay.php?fid=3) +--- Thread: openplotter v0.10.0alpha : hostapd not starting (/showthread.php?tid=787) |
openplotter v0.10.0alpha : hostapd not starting - sanrab - 2017-10-05 Hi, I'm testing openplotter v.0.10.0alpha NOOBS. Everything seems to work except wifi AP. I'm using a wifi dongle (ASUS USB-N13) that perfectly works in 0.8.0 but not in the alpha version. The status Info in openplotter WiFi AP says missing AP! or driver is not nl80211 up network: wlan0 dnsmasq (dhcp server): running hostapd (AP): stopped networking: started ip address 10.10.10.1 wlan0 Any suggestion ? Sandro I forgot: RaspberryPi mod. 2 OpenPlotter 0.15.1 beta IMU InvenSense MPU-9255 Sandro RE: openplotter v0.10.0alpha : hostapd not starting - Luckbert - 2017-10-05 Update to 0.15.1 RE: openplotter v0.10.0alpha : hostapd not starting - Sailoog - 2017-10-05 Do you know the dongle chipset? some chipsets have not support on lastest raspbian versions. I recommend you to change to a supported dongle. Moving this thread to "How do I...?" forum RE: openplotter v0.10.0alpha : hostapd not starting - sanrab - 2017-10-05 (2017-10-05, 05:18 PM)Sailoog Wrote: Do you know the dongle chipset? some chipsets have not support on lastest raspbian versions. I recommend you to change to a supported dongle. Moving this thread to "How do I...?" forum The chipset is Ralink RT3072. It works on latest raspbian. But I was wrong: it works on OP 0.10 alpha and does not work in OP 0.15. Regards sanrab RE: openplotter v0.10.0alpha : hostapd not starting - Sailoog - 2017-10-05 Be sure your have enough power to feed your system, unplug all your other devices and left just the wifi dongle, are you using a powered usb hub? RE: openplotter v0.10.0alpha : hostapd not starting - SkipperEarly - 2017-10-05 you could also add max_usb_current=1 in /boot/config.txt to boost the usb power. RE: openplotter v0.10.0alpha : hostapd not starting - jim321 - 2017-10-05 http://mitchtech.net/realtek-wireless-dongle-rt3070-on-the-raspberry-pi/ |