A beginner can manage it! - RPi3 + Sensehat - Printable Version +- OpenMarine (https://forum.openmarine.net) +-- Forum: OpenPlotter (https://forum.openmarine.net/forumdisplay.php?fid=1) +--- Forum: How I did it (https://forum.openmarine.net/forumdisplay.php?fid=6) +--- Thread: A beginner can manage it! - RPi3 + Sensehat (/showthread.php?tid=790) Pages:
1
2
|
A beginner can manage it! - RPi3 + Sensehat - Leigh - 2017-10-06 My setup:
RE: A begginer can manage it! - RPi3 + Sensehat - PaddyB - 2017-10-07 (2017-10-06, 09:58 AM)Leigh Wrote: My setup: Looks great, well done! Couple thoughts, I prefer using the opencpn android app, it's quicker than VNC and still uses all the wifi ais/gps etc data. There are 2 versions in the app store, the free one is old and not supported, the paid version is the real one, doesn't cost much. Also, for charts have you looked at ge2kap ? Using that and sasplanet you can make charts from navionics. RE: A begginer can manage it! - RPi3 + Sensehat - Leigh - 2017-10-07 Thanks Paddy. I have the free version of OpenCPN Android, will buy the one by Dave Register too. Where can I find a tutorial about using ge2kap and sasplanet to make charts from navionics? Especially sasplanet - I can't find anything not in Russian about sasplanet. If I have OpenCPN Android then maybe the next step is to build a little system with a screen for down below. Which screen is the best/easiest/cheapest best combination - is it the Official RPi 7" ? Thanks again RE: A beginner can manage it! - RPi3 + Sensehat - waterman480 - 2017-10-08 The tutorials for GE2KAP are here: https://onedrive.live.com/?authkey=!AOZ2eHjJaiMT9yE&id=E42CE519717DF71B!1339&cid=E42CE519717DF71B RE: A beginner can manage it! - RPi3 + Sensehat - Leigh - 2017-10-12 Just got my GPS from Saloog Very easy to install - didnt need any drivers or anything Already scanned and callibrated my charts Just need a display now RE: A beginner can manage it! - RPi3 + Sensehat - PaddyB - 2017-10-12 (2017-10-08, 04:09 AM)waterman480 Wrote: The tutorials for GE2KAP are here: https://onedrive.live.com/?authkey=!AOZ2eHjJaiMT9yE&id=E42CE519717DF71B!1339&cid=E42CE519717DF71B Those might well be a bit out of date now apparently, the "step by step procedures" button should contain the latest help files. RE: A beginner can manage it! - RPi3 + Sensehat - affinite - 2017-10-19 (2017-10-12, 03:02 PM)PaddyB Wrote:(2017-10-08, 04:09 AM)waterman480 Wrote: The tutorials for GE2KAP are here: https://onedrive.live.com/?authkey=!AOZ2eHjJaiMT9yE&id=E42CE519717DF71B!1339&cid=E42CE519717DF71B A few pointers on using sasplanet would be appreciated ? Ive used GE2KAP for GE harbour and anchorage images but a port plan capture would be useful as well Ive installed SASPlanet but cant see how to capture an image from the N. web app RE: A beginner can manage it! - RPi3 + Sensehat - PaddyB - 2017-10-19 [quote pid='3390' dateline='1508426328'] A few pointers on using sasplanet would be appreciated ? Ive used GE2KAP for GE harbour and anchorage images but a port plan capture would be useful as well Ive installed SASPlanet but cant see how to capture an image from the N. web app [/quote] SASPlanet KAPs and be created with ge2kap, you open up sasplanet, zoom to the area you and then in ge2kap select sasplanet from the dropdown menu for "overlay chart image"on the right. Then press create chart. RE: A beginner can manage it! - RPi3 + Sensehat - affinite - 2017-10-20 (2017-10-19, 06:46 PM)PaddyB Wrote: [quote pid='3390' dateline='1508426328'] SASPlanet KAPs and be created with ge2kap, you open up sasplanet, zoom to the area you and then in ge2kap select sasplanet from the dropdown menu for "overlay chart image"on the right. Then press create chart. [/quote] I dont see how to get the Navionics Web chart loaded into SASplanet. If I select base map of Marine,Navionics Marine Charts I just get an error. Thanks for bearing with me RE: A beginner can manage it! - RPi3 + Sensehat - PaddyB - 2017-10-20 (2017-10-20, 08:24 AM)affinite Wrote:(2017-10-19, 06:46 PM)PaddyB Wrote: [quote pid='3390' dateline='1508426328'] I dont see how to get the Navionics Web chart loaded into SASplanet. If I select base map of Marine,Navionics Marine Charts I just get an error. Thanks for bearing with me [/quote] Ah, yes, I had to do something but can't remember exactly what now... You could try this - remove the ".doc" of the atached file then unzip into ...../Maps/sas.maps/Marine |