SDR AIS setup - Printable Version +- OpenMarine (https://forum.openmarine.net) +-- Forum: OpenPlotter (https://forum.openmarine.net/forumdisplay.php?fid=1) +--- Forum: How do I...? (https://forum.openmarine.net/forumdisplay.php?fid=3) +--- Thread: SDR AIS setup (/showthread.php?tid=867) |
SDR AIS setup - seaspray - 2017-11-20 Now that I have a reliable USB hub I thought I'd try my DVB device as an AIS receiver. I went through the calibration steps and came up with a correction of around -50. I've enabled AIS reception. I was previously using an external USB receiver via a serial USB so I disabled that. However, I have no idea how to 'see'/use the AIS stream. The NMEA window shows no mention of it. And there's no AIS data on the kplex tcp port. Have i missed a step somewhere? Clearly the device is working else the calibration wouldn't work. It's a 130 mile round trip to the boat to be able to receive some AIS signals so I'd like to have a plan to resolve it next time. RE: SDR AIS setup - seaspray - 2017-11-27 So, it seems you don't have to do anything ... The reason it wasn't working before was because of the crappy telescopic antenna that came with it. Once I connected a proper VHF antenna, the waterfall display went blue and I could 'see' the AIS bursts. Opencpn used the data automatically . RE: SDR AIS setup - Sailoog - 2017-11-29 Yes, OP is ready out of the box to get ASR AIS. Just calibrate. The mini antenna is for FM radio. You need a VHF size antenna. |