Posts: 5
Threads: 1
Joined: Dec 2022
Reputation:
0
buongiorno a tutti, Openplotter V3 ,nel tentativo di installare una BME280 e quindi una MPU9250 mi sono imbattuto nell'errore " handshake status 401 unauthorized" che di fatto mi impedisce di proseguire.mi potete aiutare?
Posts: 2,888
Threads: 59
Joined: Mar 2016
Reputation:
278
Recentemente ho scoperto che questo accade anche quando hai qualche sorgente GPS che invia data e ora sbagliate perché non ha ancora una buona visuale dei satelliti. Questo è il tuo caso?
Posts: 2,888
Threads: 59
Joined: Mar 2016
Reputation:
278
You probably have a GPS indoor that is sending wrong time and data to signal k. Try disabling the GPS or the "set system time" signal k plugin and reboot.
If that does not work try reinstalling Signal k from openplotter-signalk-installer after updating to the latest version.
Posts: 5
Threads: 1
Joined: Dec 2022
Reputation:
0
Salve, il problema è rientrato senza che facessi ulteriori attività. speriamo non ricapiti.
Posts: 5
Threads: 1
Joined: Dec 2022
Reputation:
0
Salve, Il mio ESP32 collegato via WiFi ad Openplotter ha smesso di collegarsi a Signal K. Sul Terminale del Visual Studio Code appaiono le seguenti stringhe:
"No Signal K server found when using mDNS service!".
"Initiating websocket connection with server..."
Ho notato anche, che menu "Network -check Network" di OpenPlotter la voce "dnsmasq (dhcp-sever) è in stato di "stopped".
Non so se le due cose sono collegate fra loro e vi chiedo se qualcuno può aiutarmi a risolvere il problema.
grazie